您好,SONCAP,SONCAP认证,欢迎访问杭州诺莫检测技术有限公司官方网站!

服务项目

联系方式

电话:+86-571-85691658
传真:+86-571-28867000
邮箱:service@normaltci.com
地址:浙江省杭州市滨江区江陵路88号9幢

乌干达标准清单


标准名称

US EAS 1:2011 Wheat flour – Specification

US EAS 2:2013 Maize grains – Specification (2nd Edition)

US CAC/MRL 2-2015 Maximum Residue Limits (MRLs) and Risk Management Recommendations (RMRs) for residues of veterinary drugs in foods

US CODEX STAN 3:1981 Standard for canned salmon

US EAS 4:2013 Infant formula – Specification

US EAS 5:2009 Refined white sugar – Specification

US EAS 6:2017 Fresh pineapple — Specification

US 6:1993 Standard specification for methods of analysis for foods for infants and children

US CAC/RCP 6-1972 Code of Hygienic Practice for Tree Nuts

US EAS 8:2010 Raw cane sugar – Specification

US EAS 12:2014 Potable water — Specification

US EAS 13:2014 Packaged natural mineral water — Specification

US 14:2002 Standard specification for pulses (excluding beans)

US CAC/RCP 15:1976 Code of hygienic practice for eggs and egg products

US EAS 14:2000 Specification for margarine

US EAS 16:2009 Plantation (mill) white sugar – Specification

US CODEX STAN 17:1981 Standard for canned applesauce

US 18:2004 Honey – Specification (Second edition)/ Corrigendum 1 2012-11-29

US EAS 19:2017 Fresh avocado — Specification

US CODEX/RCP 21:1979 Code of hygienic practice for foods for infants and children

US CAC/RCP 22-1979 Code of hygienic practice for groundnuts (peanuts)

US EAS 22:2006 Butter — Specification

US EAS 27:2006 UHT milk – Specification

US 28:2002 Code of practice for hygiene in the food and drink manufacturing industry

US 31:1999 Standard specification for jam (fruits preserves) and jellies/ Amend. 1 2012-11-29

US 32:1999 Specifications for citrus marmalade

US 33:2002 Standard specification for edible ices and ice mixes

US EAS 33:2006 Yoghurt — Specification

US CAC/RCP 33-1985 (Revised in 2011) Code of hygienic practice for collecting processing and marketing of natural mineral waters

US EAS 35:2012 Fortified food grade salt — Specification

US CODEX STAN 36:1981 Standard for quick frozen finfish eviscerated or un-eviscerated

US CODEX STAN 37:1981 Standard for canned shrimps or prawns

US EAS 38:2013 Labelling of pre-packaged foods — General requirements

US CAC/RCP 39:1993 Code of hygienic practice for precooked and cooked foods in mass catering

US 40:2000 Standard specification for papain powder

US CODEX STAN 41:1981 Standard for quick frozen peas

US CAC/RCP 42-1995 (Revised in 2014) Code of hygienic practice for spices and dried aromatic herbs (Second edition)

US CODEX STAN 42:1981 Standard for canned pineapple

US EAS 43:2012 Bread — Specification/ Corrigendum 1 2013-09-30

US EAS 44:2011 Milled maize (corn) products – Specification

US 45:2017 General standard for food additives (6th Edition)

US EAS 46:2013 Dry beans – Specification (2nd Edition)

US 47:2011 Carbonated and non-carbonated soft drinks – Specification

US CAC/RCP 48-2001 Code of hygienic practice for bottled/packaged drinking waters (other than natural mineral waters)

US 49:2000 Standard specification for mango chutney

US EAS 49:2006 Dried whole milk and skimmed milk powder — Specification

US CAC/GL 50-2004 General guidelines on sampling

US 51-1:2000 Specification for mayonnaise - Part 1: Real mayonnaise/ Corrigendum 1 2012-11-29

US 51-2:2000 Specification for mayonnaise - Part 2: Low fat mayonnaise/ Corrigendum 1 2012-11-29

US EAS 51:2013 Wheat grains – Specification (2nd Edition)

US CAC/RCP 51-2003 (Revised in 2014) Code of practice for the prevention and reduction of mycotoxin contamination in cereals (Second Edition )

US CODEX STAN 52:1981 Standard for quick frozen strawberries

US CAC/RCP 52:2003 Code of practice for fish and fishery products

US CAC/RCP 53:2003 Code of hygienic practice for fresh fruits and vegetables

US CODEX/RCP 55:2004 Code of Practice for the prevention and reduction of aflatoxin contamination in peanuts

US EAS 57-1:2000 Groundnuts (peanuts) - Specification - Part 1: Raw groundnuts for table use and for oil milling

US EAS 57-2:2000 Groundnuts (peanuts) - Specification - Part 2: Roasted groundnuts

US CAC/RCP 59-2005 (Revision in 2010) Code of practice for the prevention and reduction of aflatoxin contamination in Tree Nuts

US EAS 60:2013 Peanut butter – Specification (2nd Edition)

US CODEX STAN 60:1981 Standard for canned raspberries

US CODEX STAN 61:1981 Standard for canned pears

US EAS 61:2014 Opaque beer — Specification

US EAS 62-1:2017 Fish handling and processing — Code of practice — Part 1: Fresh fish

US 62:2011 Fruit juice drinks – Specification

US CODEX STAN 62:1981 Standard for canned strawberries

US EAS 63:2014 Beer — Specification

US CAC/RCP 63-2007 Code of practice for prevention and reduction of ochratoxin A contamination in wine

US CAC/GL 66–2008 Guidelines for the use of flavourings

US EAS 66-1:2017 Tomato products — Specification — Part 1: Canned (preserved) tomato

US EAS 66-2:2017 Tomato products — Specification — Part 2: Tomato sauce and ketchup

US EAS 66-3:2017 Tomato products — Specification — Part 3: Tomato juice

US EAS 66-4:2017 Tomato products — Specification — Part 4: Tomato concentrates (paste and puree)

US CODEX STAN 66:1981 Standard for table olives

US EAS 67:2006 Raw cow milk – Specification

US CODEX STAN 67:1981 Standard for raisins

US CAC/RCP 68-2009 Code of practice for the reduction of contamination of food with polycyclic aromatic hydrocarbons (PAH) from smoking and direct drying process

US EAS 68-2-1:2006 Milk and milk products — Methods for microbiological examination — Part 2-1: Enumeration of coliforms ─ Colony count technique at 30 °C

US EAS 68-2-2:2006 Milk and milk products — Methods of microbiological examination ─ Part 2-2: Enumeration of coliforms ─ Most probable number technique at 30 °C

US EAS 68-4:2006 Milk and milk products — Methods of microbiological examination ─ Part 4:Swab test

US EAS 69:2006 Pasteurized milk — Specification

US CODEX STAN 69:1981 Standard for quick frozen raspberries

US EAS 70:2006 Dairy ices and dairy ice creams — Specification

US CODEX STAN 70:1981 Standard for canned tuna and bonito

US EAS 72:2013 Processed cereal-based foods for infants and young children – Specification

US CAC/RCP 72:2013 Code of practice for the prevention and reduction of Ochratoxin A contamination in cocoa

US CODEX STAN 73:1981 Standard for canned baby foods

US CAC/RCP 73:2013 Code of practice for reduction of Hydrocyanic Acid (HCN) in cassava and cassava products

US CAC/RCP 75-2015 Code of practice for low-moisture foods

US CODEX STAN 75:1981 Standard for quick frozen peaches

US EAS 76:2000 Tomato products - Test methods

US CODEX STAN 76:1981 Standard for quick frozen bilberries

US CODEX STAN 77:1981 Standard for quick frozen spinach

US EAS 78:2000 Milk-based baby foods – Specification

US CODEX STAN 78:1981 Standard for canned fruit cocktail

US EAS 81-1:2006 Milk powders ─ Methods of analysis ─ Part 1: Determination of ash and alkalinity

US EAS 81─7:2006 Milk powders - Assessment of heat class - Heat-number reference method

US EAS 83:2017 Fresh tomato — Specification

US CODEX STAN 86:1981 Standard for cocoa butter

US EAS 87:2006 Sweetened condensed milk – Specification

US CODEX STAN 88-1981(Revised in 2015) Standard for corned beef

US EAS 89:2011 Millet flour – Specification

US CODEX STAN 89-1981(Revised in 2015) Standard for luncheon meat

US CODEX STAN 90:1981 Standard for canned

US EAS 91:2017 Passion fruits — Specification

US CODEX STAN 94:1981 Standard for sardines and sardine type products

US EAS 95:2011 Sorghum flour – Specification

US CODEX STAN 95:1981 Standard for quick frozen lobsters

US CODEX STAN 96:1981 Standard for cooked cured ham

US 97/ISO 13690 Method for sampling of cereals (as grain)

US EAS 97:1999 Fishmeal — Specification

US CODEX STAN 97:1981 Standard for cooked cured pork shoulder

US EAS 98:1999 Curry powder – Specification

US CODEX STAN 98:1981 Standard for cooked cured chopped meat

US CODEX STAN 99:1981 Standard for canned tropical fruit salad

US CODEX STAN 103:1981 Standard for quick frozen blueberries

US CODEX STAN 104:1981 Standard for quick frozen leek

US EAS 104:2014 Alcoholic beverages — Methods of sampling and test

US EAS 105:1999 Roasted coffee beans and roasted ground coffee – Specification

US CODEX STAN 105:1981 Standard for cocoa powders (cocoas) and dry mixtures of cocoa and sugars

US EAS 106:2000 Coffee and its products – Glossary of terms

US CODEX STAN 106:1981 General standard for irradiated foods

US EAS 109:1987 Potable spirit — Specification

US 110:1999 Sodium chloride for industrial use – Determination of cadmium content

US CODEX STAN 110:1981 Standard for quick frozen broccoli

US 111:1999 Sodium chloride for industrial use - Determination of copper content

US CODEX STAN 111:1981 Standard for quick frozen cauliflower

US 112:1999 Sodium chloride - Determination of lead content

US CODEX STAN 112:1981 Standard for quick frozen Brussels sprouts

US 113:1999 Sodium chloride - Determination of mercury content

US CODEX STAN 113:1981 Standard for quick frozen green and wax beans

US 114:1999 Sodium chloride - Determination of pH and total alkalinity

US 115:1999 Sodium chloride - Determination of iron content

US CODEX STAN 115:1981 Standard for pickled cucumbers

US 116:1999 Sodium chloride - Determination of anti-caking additives content of salt

US CODEX STAN 119:1981 Standard for canned finfish

US EAS 128:2013 Milled rice – Specification (2nd Edition)

US 129:1999 Code of Practice for the handling processing storage and placing on the market of fish and fishery products

US 130:1999 General requirements for establishing a Hazard Analysis Critical Control Points (HACCP) – Programme for Food Processing Establishments

US EAS 130:1999 Green coffee beans – Specification

US 131:1999 Fish and fishery products – Determination of the concentration of Total Volatile Basic Nitrogen (TVBN)

US CODEX STAN 131:1981 Standard for unshelled pistachio nuts

US EAS 138:2014 Still table wine — Specification

US EAS 139:2014 Fortified wine — Specification

US EAS 140:2014 Sparkling wine — Specification

US CODEX STAN 140:1983 Standard for quick frozen carrots

US CODEX STAN 141:1983 Standard for cocoa (cacao) mass (cocoa/chocolate Liquor) and cocoa cake

US EAS 141:2014 Whisky — Specification

US EAS 142:2014 Vodka — Specification

US EAS 143:2014 Brandy — Specification

US CODEX STAN 143:1985 Standard for dates

US EAS 144:2014 Neutral spirit — Specification (2nd Edition)

US EAS 145:2014 Gin — Specification

US CODEX STAN 145:1985Standard for canned chestnuts and chestnut puree

US EAS 146:2014 Rum — Specification

US CODEX STAN 151:1985 Standard for gari

US EAS 153:2014 Packaged drinking water — Specification

US CODEX STAN 156:1987 Standards for follow-up formula

US CODEX STAN 159:1987 Standard for canned mangoes

US EAS 160:2006 Milk and dried milk butter milk and butter milk powder whey and whey powder — Determination of phosphatase activity

US 163:2000 Code of hygienic practice for milk and milk products

US CODEX STAN 163:1987 Standard for wheat protein products

US 168:2006 Edible oils and fats - Specification (2nd Edition)

US 170:2000 Standard specifications for edible cotton seed oil

US 174:2000 Standard specifications for edible palm kernel oil

US CODEX STAN 174:1989 General standard for vegetable protein products

US 175:2000 Standard specification for edible sesame oil

US CODEX STAN 177:1991 Standard for grated desiccated coconut

US CODEX STAN 179:1991 General standard for vegetable juices

US CODEX STAN 181:1991 Standard for formula foods for use in weight control

US CODEX STAN 183:1993 Standard for papaya

US CODEX STAN 185:1993 Standard for nopal

US CODEX STAN 186:1993 Standard for prickly pear

US CODEX STAN 187:1993 Standard for carambola

US 190:2000 EAS 101:2000 Foodstuffs – Method for determination of arsenic

US CODEX STAN 196:1995 Standard for litchi

US CODEX STAN 201:1995 Standard for oats

US CODEX STAN 204:1997 Standard for mangosteens

US CODEX STAN 206:1999 General standard for use of dairy terms

US CODEX STAN 209:1999 (Rev. 1-2001) Maximum level and sampling plan for total aflatoxins in peanuts intended for further processing

US 212-1:2000/EAS 147-1 Vinegar - Specification Part 1: Vinegar from natural sources

US 212-2:2000/EAS 147-2 Vinegar - Specification Part 2: Vinegar from artificial sources

US CODEX STAN 213:1999 Standard for limes

US CODEX STAN 214:1999 Standard for pummelos (citrus grandi)

US CODEX STAN 215:1999 Standard for guavas

US 216-1:2000 Carbon dioxide for use in manufacture of beverages - Part 1: Specifications

US CODEX STAN 216:1999 Standard for chayotes

US 217-1/EAS 217-1:2001 Methods for microbiological examination of foods – Part 1: General procedures and techniques

US 217-5/EAS 217-5:2001 Methods for microbiological examination of foods – Part 5: Enumeration of coagulase-positive Staphylococci

US 217-6/EAS 217-6:2001 Methods for microbiological examination of foods – Part 6: Examination for Salmonella Spp

US 217-7/EAS 217-7:2001 Methods for microbiological examination of foods – Part 7: Examination for Clostridium Botulinum and Clostridium Botulinum toxin

US 217-8/EAS 217-8:2001 Methods for microbiological examination of foods – Part 8: Enumeration of Yeast and Moulds in Foods

US CODEX STAN 218:1999 Standard for ginger

US CODEX STAN 219:1999 Standard for grapefruits (Citrus paradisi)

US CODEX STAN 220:1999 Standard for longans

US EAS 221:2001 Woven bags (100 % sisal) for coffee beans – Specification

US CODEX STAN 221-2001 (Revision in 2013) Group standard for unripened cheese including fresh cheese

US CODEX STAN 224:2001 Standard for tannia

US CODEX STAN 225:2001Standard for asparagus

US CODEX STAN 226:2001 Standard for cape gooseberry

US EAS 230:2001 Maize bran as livestock feed — Specification

US EAS 231:2001 Bone meal for compounding animal feeds— Specification

US EAS 232: 2001 Maize gluten feed — Specification

US EAS 233: 2001 Ostrich feed — Specification

US CODEX STAN 241:2003Standard for canned bamboo shoots

US CODEX STAN 242:2003 Standard for canned stone fruits

US 243:2000/EAS 173 Standard specification for pasta

US CODEX STAN 243:2003 Standard for fermented milks

US CODEX STAN 249:2006Standard for instant noodles

US CODEX STAN 251-2006 Blend of skimmed milk and vegetable fat in powdered form

US CODEX STAN 253:2006 Standard for dairy fat spreads

US CODEX STAN 255:2007 Standard for table grapes

US CODEX STAN 260:2007 Standard for pickled fruits and vegetables

US CODEX STAN 262-2006 (Revision in 2013) Standard for Mozzarella

US CODEX STAN 263-1966 (Revision in 2013) Standard for Cheddar

US CODEX STAN 264-1966 (Revision in 2013) Standard for Danbo

US CODEX STAN 265-1966 (Revision in 2013) Standard for Edam

US CODEX STAN 266-1966 (Revision in 2013) Standard for Gouda

US CODEX STAN 267-1966 (Revision in 2013) Standard for Havarti

US CODEX STAN 268-1966 (Revision in 2013) Standard for Samsø

US CODEX STAN 269-1967 (Revision in 2013) Standard for Emmental

US CODEX STAN 270-1968 (Revision in 2013) Standard for Tilsiter

US CODEX STAN 271-1968 (Revision in 2013) Standard for Saint-Paulin

US CODEX STAN 272-1968 (Revision in 2013) Standard for Provolone

US CODEX STAN 273-1968 (Revision 2016) Cottage cheese

US CODEX STAN 274-1969 (Revision in 2010) Standard for Coulommiers

US CODEX STAN 275-1973 (Revision in 2010) Standard for Cream Cheese

US CODEX STAN 276-1973 (Revision in 2010) Standard for Camembert

US CODEX STAN 277:1973 (Revision in 2010) Standard for Brie

US 277:2017 General standard for the labelling of food additives when sold as such (2nd Edition)

US CODEX STAN 281:1971 Standard for evaporated milks

US 282:2000/EAS 41- 0 Fruit vegetables and derived products – Sampling and test methods – General

US CODEX STAN 283:1978 General standard for cheese

US EAS 284:2013 Pearl millet grains – Specification (2nd Edition)

US CODEX STAN 284:1971 (Revision in 2010) Standard for Whey Cheeses

US CODEX STAN 288:1976 (Revision in 2010) Standard for cream and prepared creams

US CODEX STAN 289:1995 Standard for whey powders

US CODEX STAN 290:1995 Standard for edible casein products

US 292:2002 Specification for Black tea

US EAS 297:2013 Edible soya bean oil – Specification

US EAS 299:2013 Edible sunflower oil – Specification

US EAS 300:2013 Edible groundnut oil – Specification

US EAS 301:2013 Edible palm oil – Specification

US CODEX STAN 302:2011 Standard for fish sauce

US 303:2002 Glossary of terms used in tea trade

US CODEX STAN 303:2011 – Standard for tree tomatoes

US EAS 304:2013 Edible corn oil – Specification

US CODEX STAN 310:2013 Standard for pomegranates

US 314-1:2001/EAS 216-1 Ethanol for Industrial use - Methods of test - Part 1: General

US 314-2:2001/EAS 216-2 Ethanol for Industrial use - Methods of test - Part 2: Detection of alkalinity or determination of acidity to phenolphthalein

US 314-3/EAS 216-3 Ethanol for Industrial use - Methods of test Part 3: Estimation of content of carbonyl compounds present in small amounts - Photometric method

US 314-4:2001/EAS 216-4 Ethanol for Industrial use - Methods of test Part 4: Estimation of content of carbonyl compounds present in moderate amounts - Titrimetric method

US 314-5:2001/EAS 216-5 Ethanol for Industrial use - Methods of test Part 5: Determination of aldehydes Content – Visual calorimetric method

US 314-6:2001/EAS 216-6 Ethanol for Industrial use - Methods of test Part 6: Test for miscibility with water

US 314-7:2001/EAS 216-7 Ethanol for Industrial use - Methods of test Part 7:Determination of methanol content [Methanol content between 0.01% to 0.02% (v/v)] - photometric method

US 314-8:2001/EAS 216-8 Ethanol for Industrial use - Methods of test Part 8: Determination of methanol content [Methanol contents between 0.10% and 1.50% (v/v) - Visual Calorimetric method

US 314-9:2001/EAS 216-9 Ethanol for Industrial use - Methods of test Part 9: Determination of esters content – Titrimetric method after saponification

US 314-10:2001/EAS 216-10 Ethanol for Industrial use - Methods of test Part 10: Estimation of hydrocarbons content – Distillation method

US 314-11:2001/EAS 216-11 Ethanol for Industrial use - Methods of test Part 11: Test for detection of furfural

US 314-12:2001/EAS 216-12 Ethanol for Industrial use - Methods of test Part 12: determination of permanganate time

US 315:2001/EAS 215:2001 Determination of water - Karl Fischer method (General method)

US 316:2001/EAS 214 Volatile organic liquids for industrial use - Determination of dry residue after evaporation on a water bath - General method

US 317:2001/EAS 213 Liquid chemical products for industrial use - Determination of absolute density at 20 ºC

US 318:2001/EAS 212 Determination of Lead Content - Flameless atomic absorption spectrometric method

US CODEX STAN 318:2014 Standard for Okra

US EAS 320:2006 Code of hygiene for transportation of edible fats and oils in bulk

US CODEX STAN 321-2015 Standard for ginseng products

US EAS 329:2017 Fresh mango — Specification

US 330:2001 Cereals pulses and other food grains – Nomenclature

US 331:2001 Cereals – Vocabulary

US EAS 331:2013 Green grams – Specification (2nd Edition)

US 334: 2001 Barley grains-specification

US EAS 349:2014 Liquid glucose (glucose syrup) – Specification

US EAS 350:2014 Hard boiled sweets – Specification

US 351:2001 Sorghum – Determination of tannin content

US EAS 352:2014 Chewing gum and bubble gum – Specification

US EAS 353:2004 Wheat bran for animal feeds — Specification

US 365:2002 Specification for powdered (icing) sugar

US 367 Milled cereal products – Methods of test (General methods)

US 368:2001 Rice - Determination of extraneous matter broken kernels defective kernels and other kinds of rice

US 395:2002 Specification for wheat semolina

US 420:2002 Specification for Toffee

US 422:2002 Glossary of terms used in confectionery

US 446:2002 Oil-seed cakes for compounding livestock feed –Specification

US EAS 456:2007 Organic products standard

US 472:2002 Specification for durum wheat semolina

US 473:2002 Specification for durum wheat flour

US 568 Packaging for the international transport of fresh fruits or refrigerated fruits and vegetables – Recommendations

US 569 General guidelines for labeling of fresh fruits and vegetables

US 570:2006 Code of hygienic practice for dried fruits

US 571:2006 Baking powder – Specification

US 572:2017 Sodium bicarbonate — Specification (2nd Edition)

US 615:2006 Soya beans – Specification

US 616:2006 Sunflower seeds – Specification

US 617:2006 Specification for edible palm olein

US 635:2006 Code of hygiene practice for oilseeds handling and milling

US 636:2006 Specification for edible palm stearin

US 640:2006 Code of practice for production handling and processing of solar dried fruits

US 641:2006 Code of practice for apiary management handling and processing of bee products

US 642:2006 Olive oil – Specification

US 733:2007 Requirements for handling and transportation of slaughter animals

US 734:2007 Requirements for the design and operation of abattoirs and slaughterhouses

US 736:2007 Hygienic requirements for butcheries

US 737:2007 Requirements for hygiene in the production of packaged meat products (processed or manufactured)

US 738:2017 General standard for contaminants and toxins in food and feed (5th Edition)

US EAS 738:2010 Fresh sweet cassava – Specification

US 739:2012 Sausages — Specification

US EAS 739:2010 Dried cassava chips – Specification

US EAS 740:2010 Cassava flour – Specification

US EAS 741:2010 Cassava composite wheat flour – Specification

US EAS 742:2010 Food grade cassava starch – Specification

US EAS 743:2010 Cassava crisps – Specification

US EAS 744:2010 Cassava and cassava products – Determination of total cyanogens – Enzymatic assay method

US EAS 745:2010 Potato crisps – Specification

US EAS 746:2010 Frozen potato chips – Specification

US EAS 747:2010 Fried potato chips – Specification

US EAS 748:2017 Fresh ware potato — Specification

US EAS 749:2010 Brown sugar – Specification

US EAS 753:2011 Seed potato – Specification

US EAS 754:2013 Chickpeas – Specification (2nd Edition)

US EAS 755:2013 Cowpeas – Specification (2nd Edition)

US EAS 756:2013 Pigeon peas – Specification (2nd Edition)

US EAS 757:2013 Sorghum grains – Specification (2nd Edition)

US EAS 758:2013 Finger millet grains – Specification (2nd Edition)

US EAS 759:2013 Dry whole peas – Specification (2nd Edition)

US EAS 760:2013 Lentils – Specification (2nd Edition)

US EAS 761:2013 Dry split peas – Specification (2nd Edition)

US EAS 762:2013 Dry soybeans – Specification (2nd Edition)

US EAS 763:2013 Faba beans – Specification (2nd Edition)

US EAS 764:2013 Rough (Paddy) rice – Specification (2nd Edition)

US EAS 765:2013 Brown rice – Specification (2nd Edition)

US EAS 767:2012 Fortified wheat flour — Specification

US EAS 768:2012 Fortified milled maize products — Specification

US EAS 769:2012 Fortified edible oils and fats — Specification

US EAS 770:2012 Fortified sugar — Specification

US EAS 771:2012 Fresh sweetpotato — Specification

US EAS 772:2012 Dried sweetpotato chips — Specification

US EAS 773:2012 Sweetpotato flour — Specification

US EAS 774:2012 Sweetpotato crisps – Specification

US EAS 775:2012 Production and handling of fresh ware potato — Code of practice

US EAS 776:2012 Production and handling of fresh cassava — Code of practice

US EAS 777:2012 Code of practice for reduction of acrylamide in potato products

US EAS 778:2012 Fresh bitter cassava — Specification

US 778:2007 Requirements for animal stock routes check points and holding grounds

US 779:2007 Requirements for the transportation of meat and meat products

US EAS 779:2012 High quality cassava flour — Specification

US 780:2012 Powdered silver cyprinid (Mukene) — Specification

US EAS 780:2012 Fresh cassava leaves — Specification

US EAS 781:2012 Biscuits — Specification

US EAS 782:2012 Composite flour – Specification

US EAS 797:2013 Vitamin and mineral food supplements – Requirements

US EAS 798:2013 Lipid food supplements – Requirements

US EAS 799:2014 Edible full fat soya flour — Specification

US EAS 800:2014 Soya milk — Specification

US EAS 801:2014 Soya protein products — Specification

US EAS 802:2014 Textured soya protein products — Specification

US EAS 803:2014 Nutrition labelling — Requirements

US EAS 804:2014 Claims on food — Requirements

US EAS 805:2014 Use of nutrition and health claims — Requirements

US 806:2009 Poultry feeds — Specification

US 807:2009 Cattle feeds — Specification

US 808:2009 Dog feeds — Specification

US 811:2009 Pig feeds — Specification

US 812:2009 Goats and sheep feeds — Specification

US 813:2009 Rabbit feeds — Specification

US 814:2009 Fish feeds — Specification

US 815:2009 Cat feeds — Specification

US 817:2008 Milk fat products — Specification

US 818:2009 Fruit juices and nectars — Specification/Amend. 1 2012-11-29

US EAS 818:2014 Sugar cane jaggery – Specification

US EAS 819:2014 Molasses – Specification

US EAS 820:2014 Dextrose monohydrate (glucose powder) – Specification

US EAS 821:2014 Maize seed – Requirements for certification

US EAS 822:2014 Sorghum seed – Requirements for certification

US EAS 823:2014 Sunflower seed – Requirements for certification

US EAS 824:2014 Soybean seed — Requirements for certification

US EAS 825:2014 Groundnut seed — Requirements for certification

US EAS 826:2017 Dried silver cyprinid (Rastrineobola argentea) — Specification

US EAS 827:2015 Fresh and frozen whole fin fish – Specification

US EAS 828:2017 Dried and salted-dried fish — Specification

US EAS 829:2015 Transport of live fish seeds for aquaculture purposes – Code of practice

US EAS 830:2015 Fresh fish sticks (fish fingers) fish portions and fish fillets – Breaded or in batter – Specification

US EAS 831:2015 Frozen fish fillets – Specification

US EAS 832:2015 Fish industry – Operational cleanliness and hygiene – Guidelines

US EAS 833:2015 Processing and handling of dried fish and fish products – Code of practice

US EAS 834:2015 Processing and handling of salted fish and fish products – Code of practice

US EAS 870:2017 Crackers from marine and freshwater fish crustacean and molluscan shellfish — Specification

US EAS 871:2017 Fish sausages — Specification

US 871:2011 Malted cereal beverages — Specification

US 872:2011 Fermented (non-alcoholic) cereal beverages — Specification

US EAS 872:2015 Frozen octopus — Specification

US EAS 873:2017 Frozen tuna loins — Specification

US EAS 874:2017 Processing and handling of prawns and shrimp — Code of practice

US EAS 875:2017 Quick frozen prawns or shrimps — Specification

US EAS 876:2017 Smoked fish smoke-flavoured fish and smoke-dried fish — Specification

US 876:2009 Chillies whole and ground (powdered) — Specification

US 877: 2011 Dried fruits — Specification

US 882: 2011 Fruit chips and crisps — Specification

US 889:2011 Dried vegetables and herbs for food use – Specification

US 890:2011 Dried tomatoes – Specification

US 891:2011 Dried carrots – Specification

US EAS 891:2017 Fresh carrot — Specification

US EAS 892:2016 Fresh sweet banana — Specification

US EAS 893:2017 Chilli sauce — Specification

US EAS 894:2017 Fresh onions — Specification

US 894:2011 Dried edible mushrooms – Specification

US EAS 895:2017 Fish protein concentrate — Specification

US EAS 896:2017 Fried fish — Specification

US EAS 897:2017 Frozen lobster tails — Specification

US EAS 898:2017 Processing and handling of smoked fish smoke-flavoured fish smoke-dried fish and smoked fish products — Code of practice

US EAS 899: 2017 Tuna canned in oil — Specification

US 907:2011 Instant coffee – Specification

US 908:2013 Nutrient-concentrated foods for therapeutic uses – Specification

US 917:2012 Dressed poultry — Specification

US 922:2011 Meat grading system – Requirements – Part 1: Beef

US 923:2013 Code of practice for Horticulture Industry

US 931:2012 Minced meat — Specification

US 932:2012 Bovine (beef) carcasses and cuts — Specification

US 952:2013 Amaranth grain — Specification

US 953:2013 Amaranth flour — Specification

US 979:2013 Breakfast cereals — Specification

US 980:2013 Herbal tea – Specification

US 983:2015 Banana (matooke) flour – Specification

US 985:2014 Apple — Specification

US 997:2014 Cooking banana (matooke) — Specification

US 998:2014 Plantain (gonja) — Specification

US 999:2013 Fresh chilli pepper— Specification

US 1502:2013 Fresh Bermuda onions — Specification

US 1502:2013 Fresh Bermuda onions — Specification

US 1503:2013 Fresh common green onions — Specification

US 1504:2013 Fresh Creole onions — Specification

US 1534:2014 Liqueur — Specification

US 1536:2013 Code of practice for prevention and reduction of Ochratoxin A in Uganda

US 1541:2013 Chocolate and chocolate products – Specification

US 1545:2015 Soya beverage – Specification

US 1548:2013 Raw goat milk – Specification

US 1558:2015 Food grain snacks – Specification

US 1576:2015 Biofertilizer – Specification

US 1577:2015 Biopesticide – Specification

US 1584:2017 Organic fertilizer — Specification

US 1597:2015 Flavoured UHT milk – Specification

US 1598:2015 Alcoholic beverages —Ready to Drink (RTD) — Specification

US 1599:2015 Pastry – Specification

US 1600:2015 Dairy whitener – Specification

US 1603: 2016 Chia seed — Specification

US 1612:2015 Fresh mushroom – Specification

US 1613:2015 Fresh papaya – Specification

US 1614:2015 Fresh orange – Specification

US 1615:2015 Fresh jackfruit – Specification

US 1616:2015 Fresh headed cabbage – Specification

US 1618:2015 Fresh water melon – Specification

US 1619:2015 Fresh tangerine

US 1620:2015 Fresh lemon – Specification

US 1621:2015 Fresh grapes – Specification

US 1628:2016 Sesame – Specification

US 1636:2016 Shea nut – Specification

US 1635 2016 Shea butter – Specification

US 1648:2016 Warehouse and warehousing for bagged storage for cereals and pulses – Requirements

US 1653:2017 Dairy based beverages — Specification

US 1659:2017 Materials in contact with food — Requirements for packaging materials

US 1660:2017 Inorganic foliar fertilizer — Specification

US.1661:2017 Magnesium sulphate fertilizer — Specification

US 1675:2017 Determination of overall migration of constituents of plastic materials and articles intended to come into contact with food stuffs — Methods of analysis

US 1676:2017 Pulse flour — Specification

US 1677:2017 Poultry feed premix — Specification

US 1678:2017 Dairy cattle feed premix — Specification

US 1682:2017 Edible eggs in shell — Specification

US 1683:2017 Egg powder — Specification

US 1684:2017 Plant protein-based yoghurt (vegetable curd) — Specification

US 1702:2017 Raw macadamia nuts – Specification

US 1703:2017 Roasted macadamia nuts — Specification

US 1704:2017 Raw cashew nuts — Specification

US 1705:2017 Roasted cashew nuts — Specification

US 1712:2017 Dried insect products for compounding animal feeds — Specification

US EAS 11:2013 Galvanized plain and corrugated steel sheets — Specification

US 65:2002 Specification for precast paving blocks

US 100-1:2016 Cement — Test methods — Part 1: Determination of strength (2nd Edition)

US 100-2:2016 Cement — Test methods — Part 2: Chemical analysis (2nd Edition)

US 100-3:2016 Cement — Test methods — Part 3: Determination of setting times and soundness (2nd Edition)

US 100-4:2016 Cement — Test methods — Part 4: Quantitative determination of constituents (2nd Edition)

US 100-5:2001/EAS 148-5 Methods of testing Cement - Part 5: Pozzolanicity test for pozzolanic cements

US 100-6:2016 Cement — Test methods — Part 6: Determination of fineness (2nd Edition)

US 100-7:2016 Cement — Test methods — Part 7: Methods of taking and preparing samples (2nd Edition)

US 100-8:2016 Cement — Test methods — Part 8: Heat of hydration — Solution method (2nd Edition)

US 101:2002 Specification for aggregates from natural sources for concrete

US 102:1995 Standard specification for burnt clay bricks

US EAS 108:2013 Hot-rolled heavy-thickness carbon steel sheets coils and strips — Specification

US EAS 124:1999 Rounding off number values

US EAS 134:2013 Cold rolled steel sections — Specification (2nd Edition)

US 150:2000 Specifications for fluorescent lights for use in photovoltaic systems

US 152:2000 Code of practice for installation of photovoltaic systems

US 153-1:2000/ EAS 177-1 Uncoated Aluminium Hollow-Ware Utensils Part 1: Domestic aluminium cooking pots(sufuria) and lids

US 153-2:2000/ EAS 177 -2 Uncoated aluminium hollow -ware utensils Part 2: Aluminium cooking pans

US 154:1995 Standard specification for concrete roofing tiles

US 156:1995 Standard specification for building limes (inc. methods of test)

US 158:1999 Specifications for wheel barrows

US 159:2000 Specification for steel pipes for water and gas suitable for screwing

US 160:2000 Steel wire and wire products - General - Wire and wire dimensions

US 161:2000 Specifications for hurricane lanterns

US 162:2000 Specification for machetes

US EAS 168:2014 Junction boxes for use in electrical installations — Specification (2nd Edition)

US 192-1:2000 Specification for locks and latches for doors in buildings

US 194-1:2016 Nails — Part 1: Steel nails — Specification

US 195:2000 Specification for Zinc coated fencing wires

US 196:2000 Specification for window stays fasteners and handles for vertically hinged windows

US EAS 196:2013 High-strength low-alloy Carbon Steel for hot rolled sheet and cold rolled sheet — Specification

US 197:2000 Specification for forks

US 198:2000 Specification for spades

US 199:2000 Specification for shovels

US 200:2000 Specification for steel windows sills and window boards and doors

US EAS 203:2014 Boxes for enclosure of electrical accessories — Specification (2nd Edition)

US EAS 205:2014 Controls for heating units in household electric ranges — Specification (2nd Edition)

US 219:2000 Specification for laminated leaf springs for automobiles

US 220:2003 Specification for hoes both plain and fork hoes

US 252:2004 Low Pressure Gas Cylinders - Specification for Welded Low Carbon Steel Gas Cylinders exceeding 5-Litre Water Capacity for Low Pressure Liquefiable Gases

US 261-1:2000/EAS178 Specification for PVC conduits for electric wiring. Part 1: Plain flexible

US 261-2:2000/EAS 179 Specification for PVC conduits for electric wiring. Part 2: Corrugated conduits

US 263:2000/EAS 181 Fuel tank assembly for automotive: Safety requirements

US 264-1:2001/EAS 182-1 Specification for pipes and fittings made of Unplasticized Poly Vinyl Chloride (PVC-U) for water supply - Part 1: General requirements

US 264-2:2001/EAS 182-1 Specification for Pipes and Fittings made of Unplasticized Poly Vinyl Chloride (PVC-U) for water supply - Part 2: Nominal diameters wall thicknesses and nominal pressures( metric series)

US 266:2000/EAS 189 Steel -Tensile testing (metallic materials- tensile testing at ambient temperatures)

US 271:2000 Steel and iron-Sampling and preparation of samples for the determination of chemical composition

US EAS 272:2002 Timber — Determination of moisture content for physical and mechanical tests

US EAS 273:2002 Timber — Sampling methods and general requirements for physical and mechanical tests

US EAS 274:2002 Timber — Determination of the average moisture content of a lot

US EAS 275:2002 Timber — Determination of volumetric shrinkage

US 288:2000 Specification for lime for soil stabilization

US 289:2001 Specification for limestone for chemical industries

US 290:2000 Glossary of terms used in lime products

US 291:2000 Specification for Lime (Quicklime and Hydrated Lime) for Chemical Industries

US 306:2000 Specification for standard sand for use in the testing of cement

US 310-1:2016 Cement — Part 1: Composition specification and conformity criteria for common cements (2nd Edition)

US 310-2:2016 Cement — Part 2: Conformity evaluation (2nd Edition)

US 310-3:2000 Definitions and terminology for cements

US 319:2003 Seismic code of practice for structural designs

US 322:2006 Glossary of terms used in the timber industry

US EAS 322:2002 Wood poles and blocks for power and telecommunication lines— Specification

US 323:2006 Timber - Dimensions for coniferous sawn timber (Cypress and Pine) Sizes of sawn and planed timber

US EAS 323:2002 Specification for wood preservation by means of pressure creosoting

US 324:2006 Preservation of timber– Specifications

US EAS 324:2002 Copper/chromium/arsenic compositions for the preservation of timber — Method for timber treatment

US EAS 325:2002 Wood preservatives and treated timber — Guide to sampling and preparation of wood preservatives and treated timber for analysis

US EAS 326:2002 Copper/chromium/arsenic composition for the preservation of timber — Specification

US 329-1/ISO 3134-1 Light metals and their alloys – Terms and definitions – Part 1: Materials

US 329-2/ISO 3134-2 Light metals and their alloys – Terms and definitions – Part 2: Unwrought products

US 329-3/ISO 3134-3 Light metals and their alloys – Terms and definitions – Part 3: Wrought products

US 329-4/ISO 3134-4 Light metals and their alloys – Terms and definitions – Part 4: Castings

US 329-5/ISO 3134-5 Light metals and their alloys – Terms and definitions – Part 5: Methods of processing and treatment

US EAS 354: 2004 Plastic containers for up to 5 litres capacity — Specification

US EAS 357:2004 Pneumatic tyres for trucks and buses — Specification

US EAS 358:2004 Pneumatic tyres for passenger cars — Specification

US EAS 359:2004 Pneumatic tyres for light trucks — Specification

US EAS 360:2004 Pneumatic tyres for agricultural implements — Specification

US 366-1:2004 Masonry cement – Part 1: Specification

US 366-2:2004 Masonry cement – Part 2: Test methods

US 369-3: 2001 Batteries - Part 3: General information - Definitions abbreviations and symbols.

US 371:2003 Hydraulic road binders – Composition specification and conformity criteria

US EAS 371-10:2005 Power transformers — Specification — Part 10: Determination of sound levels

US EAS 372-2:2005 Specifications for telecommunications installations – Part 2: Telecommunications pathways and spaces for commercial buildings

US EAS 372-3:2005 Specification for telecommunications installations – Part 3: Integrated telecommunications cabling systems for small office residential premises

US EAS 373:2005 External TV aerials in the frequency range 30MHz – 1GHz – Specification

US EAS 375-5:2005 Low – voltage switchgear and control gear assemblies – Part 5: Particular requirements for assemblies intended to be installed outdoors in public places – cable distribution cabinets (CDCs) for power distribution in networks

US EAS 376-1:2005 Safety of machinery – Electrical equipment of machines – Part 1: General requirements

US EAS 379-1:2005 Information technology – Configuration of customer premises cabling (CPC) for applications – Part 1: Integrated services digital network (ISDN) basic access

US EAS 379-2:2005 Information technology – Configuration of customer premises cabling (CPC) for applications – Part 2: Integrated services digital network (ISDN) primary rate

US EAS 380:2005 Public information symbols – Specifies the image content of graphical symbols used for the information of the public

US 402:1993 Standard specification for portable reflective triangles

US 403:2002 Standard specification for deep well CBMS hand pump (model U3)

US 404:2002 Standard specification for Extra deepwell CBMS handpumps

US 405:2002 Standard specification for shallow well handpumps (model U2/U3)

US 406:1995 Standard specification for deep well hand pump (model U2)

US EAS 412-1:2013 Steel for the reinforcement of concrete — Part 1: Plain bars

US EAS 412-2:2013 Steel for the reinforcement of concrete — Part 2: Ribbed bars

US 464:2002 Susceptibility of Photovoltaic (PV) modules to accidental impact damage (resistance to impact test)

US 465-1:2003 Stabilized materials for civil engineering purposes. Part 1 General requirements sampling sample preparation and tests on materials before stabilization

US EAS 468:2013 Pre-painted metal coated steel sheets and coils — Specification

US 468-2:2002 Specification for photovoltaic systems -system design installation operation monitoring and maintenance - Part 2: Test procedure for main components -charge regulators

US 468-3:2002 Specification for photovoltaic systems -systems design installation operation monitoring and maintenance - Part 3: Test procedure for main components –inverters

US 469: 2005 Characteristic parameters of standalone photovoltaic (PV) systems

US 479:2004 Code of practice for inspection of vehicles for roadworthiness

US 482-1:2003 High density polyethylene (PE-HD) pipes- Part 1: General quality requirements

US 482-2:2003 High Density Polyethylene (PE-HD) pipes- Part 2: Dimensions

US EAS 489:2008 Concrete poles for telephone power and lighting purposes — Specification

US EAS 491:2008 Incineration plant for the destruction of hospital waste — Specification

US EAS 492:2008 Incineration plant for the destruction of hospital waste — Method of test and calculation for the performance

US EAS 493:2008 Incineration plant for the destruction of hospital waste — Method for specifying purchaser’s requirements

US EAS 494:2008 Incineration plant for the destruction of hospital waste — Code of practice for the design specification installation and commissioning

US EAS 497:2008 Colours of the cores of flexible cables and cords

US EAS 498-1:2008 Low-frequency cables and wires with PVC insulation and PVC sheath — Part 1: General test and measuring methods

US EAS 498-2:2008 Low-frequency cables and wires with PVC insulation and PVC sheath — Part 2: Cables in pairs triples quads and quintuples for inside installations

US EAS 498-3:2008 Low-frequency cables and wires with PVC insulation and PVC sheath — Part 3: Equipment wires with solid or stranded conductor wires PVC insulated in singles pairs and triples

US EAS 502:2008 Electric cables — Tests on extruded over sheaths with a special protective function

US EAS 504:2008 Standard colours for insulation for low-frequency cables and wires

US EAS 505:2008 Basic and safety principles for man-machine interface marking and identification — Identification of conductors by colours or alphanumeric

US EAS 512:2008 Thermal-resistant aluminium alloy wire for overhead line conductor

US 512:2003 Specification for axes and hatchets

US EAS 513:2008 Overhead electrical conductors — Formed wire concentric lay stranded conductors

US 533:2006 Retro reflective warning signs for road vehicles – Chevron signs

US 540:2006 Hot-dip aluminium –zinc plain and corrugated steel sheets— Specification

US 545: 2004 Seat belt assemblies for motor vehicles – Specification

US 546: 2004 Anchorages for automobile seat belts – Specification

US 548: 2004 Motor vehicle safety specification - Strength of seats and of their anchorages

US 549: 2004 Code of practice - Installation of safety belts in motor vehicles

US 551: 2005 Rating of direct coupled photovoltaic (PV) pumping systems

US 552:2005 Photovoltaic system performance monitoring — Guidelines for measurement data exchange and analysis

US 555:2005 Direct coupled photovoltaic pumping systems — Design qualification and type approval

US 557:2005 Photovoltaic systems – Characteristics of utility interface

US 558-1:2005 Environmental Testing – Part 1: General and guidance

US 559: 2005 Balance-of system components for photovoltaic systems - Design qualification and type approval

US EAS 565:2006 Road vehicles — Spark-plugs — Test methods and requirements

US EAS 566:2008 Road vehicles — Spark-plugs — Terminals

US EAS 581:2008 Road vehicles – Retro-reflective registration plates for motor vehicles and trailers – Specification

US 601:1995 Standard specification for PVC - Insulated cables for electricity supplies

US 602:1995 Standard specification for PVC - Insulated cables (non armoured) for electric power and lighting

US 603:1995 Standard specification for Electro technical power telecommunication electronics lighting and colour terms. Terms particular to power engineering - Electric cable terminology

US 604:1995 Standard specification for PVC insulation and sheath of electric cables

US 605:1995 Standard Specification for conductors in insulated cables and cords

US 607-1:1996 Insulating and sheathing materials of electric cables - Methods of test for general application – Part 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties

US 607-2:1996 Insulating and sheathing materials of electric cables - Methods of test for general application - Part 2: Thermal ageing methods

US 607-4:1996 Insulating and sheathing materials of electric cables - Methods of test for general application – Part 4:Tests at Low temperature

US 607-5:1996 Insulating and sheathing materials of electric cables - Methods of test for general application – Part 5:Ozone Resistance test - Hot Set test - Mineral oil Immersion

US 607-6:1996 Insulating and sheathing materials of electric cables - Methods of test for general application - Part 6: Pressure test at high temperature - Test for resistance to cracking

US 607-7:1996 Insulating and sheathing materials of electric cables - Methods of test for general application – Part 3:methods for determining the density - water absorption tests - shrinkage test

US 607-8:1996 Insulating and sheathing materials of electric cables - Methods of test for general application - Part 8: Resistance to environmental Stress Cracking - Wrapping test after thermal ageing in air - Measurement of melt flow index - Carbon black and/or Mineral Content Measurement in PE

US 607-9:1996 Elongation at break after pre-conditioning-Wrapping test after pre-conditioning -Wrapping test after thermal ageing in air-Measurement of mass increase -Long-term stability test-Test method for Copper - Catalyzed oxidative degradation

US 607-10:1996 Test methods for electric cables – Part 10- Drop-point - Separation of oil - Lower temperature brittleness - total acid number-Absence of corrosive components -Permittivity at 23 degrees centigrade and 100 degrees centigrade

US 607-11:1996 Test methods for electric cables - Part 11: Test methods for testing polymeric insulating and sheathing materials for electric cables

US 611:1995 Standard specification for aluminium stranded conductors and aluminium stranded conductors steel-reinforced for overhead power transmission Aluminium stranded conductors

US 618:2006 Industrial standard for hot-dip zinc-coated steel sheets and coils

US 619:2006 Building and civil engineering terms — Parts of construction works- Roofs and roofing definitions

US 621:2006 Code of practice for the use of profiled sheet for roof and wall cladding on buildings — Design

US 643:2006 Roofing products from metal sheet — Fully supported products of stainless steel sheet — Specification

US 644:2006 Roofing products from metal sheet — Fully supported roofing products of steel sheet — Specification

US 645:2006 Roofing products from metal sheet— Fully supported roofing products of zinc sheet— Specifications

US 646:2006 Roofing products from metal sheet — Fully supported roofing products of copper sheet — Specification

US 648:2006 Cold reduced sheet of structural quality

US 662:2008 Code of practice for inspection and acceptance of audio video and similar electronics apparatus

US 664:2006 Metallic coatings - Hot dip galvanized coatings on ferrous materials -Gravimetric determination of the mass per unit area

US 695:2006 Fluorescent lamps for general lighting

US 708:2006 Carbon steel tubes for general structural purposes

US 709:2006 Carbon square pipes for general structural purposes

US 735:2008 Code of practice for repair and service of electrical and electronic machines/devices

US 761:2007 Energy efficiency stoves — Household biomass stoves — Performance requirements and test methods

US 765:2007 Wood charcoal and charcoal briquettes for household

US 774:2011 Specification for protective helmets for motorcycle users

US 775-1:2008 Retro-reflective registration plates for motor vehicles — Specification — Part 1: Blanks (metal)

US 775-2:2008 Retro-reflective registration plates for motor vehicles — Specification — Part 2: Metallic registration number plates

US 776:2008 Furniture — Chairs and tables for educational institutions — Functional sizes

US EAS 783:2013 Stainless steel tanks ― Specification

US EAS 784:2013 Galvanized and aluminum zinc corrugated steel sheet for roofing and wall covering — Code of practice

US 794:2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

US EAS 811-1: 2014 Code of practice for safety of electrical installations — Part 1: General

US EAS 811-2:2014 Code of practice for safety of electrical installations — Part 2: Installation and maintenance of electric supply stations and equipment

US EAS 811-3:2014 Code of practice for safety of electrical installations — Part 3: Installation and maintenance of overhead electric supply and communication lines

US EAS 811-4:2014 Code of practice for safety of electrical installations — Part 4: Installation and maintenance of underground electric supply and communication lines

US EAS 811-5: 2014 Code of practice for safety of electrical installations — Part 5: Operation of electric supply lines communication lines and equipment

US 816:2008 Specification for clay roofing tiles and ridges

US 819:2008 General labeling of electrical appliances — Instructions for use

US 833-1:2013 Sawn softwood timber — Part 1: General requirements

US 833-2:2013 Sawn softwood timber — Part 2: Stress-graded structural timber and timber for frame wall construction — Specification

US 833-3:2013 Sawn softwood timber — Part 3: Industrial timber — Specification

US 833-4:2013 Sawn softwood timber — Part 4: Brandering and battens — Specification

US 837:2009 Decorative melamine-faced boards

US 839: 2009 Particleboards – Specification

US 844:2015 Code of Practice for the design production supply and provision of wheelchairs and tricycles (2nd Edition)

US 845:2008 Road vehicles – Code of practice for the inspection and testing of used motor vehicles for road worthiness

US 849:2011 Specification for stabilized soil blocks

US 853:2009 Code of practice for solar water heating systems — Design installation testing repair and maintenance

US 854-1:2011 Thermal solar systems & components — Solar collectors — Part 1: General requirements

US 854-2:2011 Thermal solar systems & components — Solar collectors — Part 2: Test methods

US 855-1:2011 Thermal solar systems & components – Factory made solar systems –Part 1: General requirements

US 855-2:2011 Thermal solar systems & components – Factory made solar systems – Part 2: Test methods

US 856:2011 Standard method for on-site inspection and verification of operation of solar hot water systems

US 857-1: 2011 Custom built solar systems – Part 1: General requirements

US 857-2: 2011 Custom built systems – Part 2: Test methods

US 857-3: 2011 Custom built solar systems – Part 3: Performance characterization of stores for solar heating systems

US 858: 2011 Method of test for exposure of solar collector cover materials to natural weathering under conditions simulating stagnation mode

US 859: 2011 Standard practice for exposure of cover materials for solar collectors to natural weathering under conditions simulating operational mode

US 860: 2011 Standard practice for non-operational exposure and inspection of a solar collector

US 861: 2011 Method of test for evaluating absorptive solar receiver material when exposed to conditions simulating stagnation in solar collectors with cover plates

US 866:2011 Classification of fires

US 878:2011 Wood-based panels — Determination of formaldehyde content — Extraction method called the perforator method

US 885:2011 Standard practice for generating all-day thermal performance data for solar collectors

US 888:2011 Code of practice – Solar heating systems for swimming pools

US 895-1:2011 Specification for expanded metal — Part 1: Sheets and plates

US 895-2:2011 Specification for expanded metal — Part 2: Building products

US 898-1:2011 Polypropylene (PP) pipes — Dimensions

US 898-2 :2011 Types 1 2 and 3 Polypropylene (PP) pipes — Part 2: General quality requirements and testing

US 900-1:2011 Performance of household electrical appliances refrigerating appliances Part 1: Energy labeling and minimum energy performance standards requirements

US 900-2:2011 Performance of household electrical appliances — Refrigerating appliances — Part 2: Energy consumption and performance

US 901:2011 Non-ducted air conditioners — Testing and rating for performance

US 902:2011 Self-ballasted lamps for General Lighting Services (GLS) — Performance requirements

US 903-1:2011 Double-capped fluorescent lamps-performance specifications — Part 1: Minimum Energy Performance Standard (MEPS)

US 903-2:2011 Double-capped fluorescent lamps — Performance specifications — Part 2: Procedure for quantitative analysis of mercury present in fluorescent lamps

US 904-1:2011 Performance of electrical lighting equipment-ballasts for fluorescent lamps — Part 1: Energy labeling and Minimum Energy Performance Standards requirements

US 904-2:2011 Performance of electrical lighting equipment — Ballasts for fluorescent Lamps — Part 2: Method of measurement to determine energy consumption and performance of ballast-lamp circuits

US 905-1:2011 Rotating electrical machines — General requirements — Part 1: Three phase cage induction motors — High efficiency and Minimum Energy Performance Standards requirements

US 905-2:2011 Rotating electrical machines-general requirements — Part 2: Methods for determining losses and efficiency — Three phase cage induction motors

US 906:2011 Energy efficiency test methods for single- and three- phase small motors

US 927:2011 Polyethylene/aluminium/ polyethylene (PE-AL-PE) and polyethylene-RT/aluminium/ polyethylene-RT (PERT-AL-PERT) composite pressure pipes — Specification

US 928-1:2012 Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings — Part 1: DN 35 to DN 100 Pipes with Whitworth pipe thread

US 928-2:2012 Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings — Part 2: DN 100 to DN 200 pipes with trapezoidal thread

US 928-3:2012 Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings — Part 3: DN 250 to DN 400 pipes with trapezoidal thread

US 945-1:2012 Pre-insulated flexible pipe systems — Part.1: Classification general requirements and methods of test

US 945-2:2012 Pre-insulated flexible pipe systems – Part 2: Non bonded system with plastic service pipes — Requirements and methods of test

US 970-1:2012 Agglomerated stone-slabs and cut-to-size product — Part 1: Terminology of their components

US 970-2:2012 Agglomerated stone-slabs and cut-to-size product — Part 2: Product requirements

US 1000:2014 Hexagonal weights — Specification

US 1002:2014 Tyre pressure gauges for motor vehicles — Specification

US 1003:1999/OIML R111 Standard specification for weights of classes E1 E2 F1 F2 M1 M2 M3

US 1004:1999/OIML R76-1 Standard specification for Non automatic weighing instruments

US 1005:1999/OIML R 117 Standard specification for measuring systems for liquids other than water

US 1015:2006 Clinical thermometers (mercury in glass with maximum devices)

US 1016:2006 Non-invasive mechanical sphygmomanometers

US 1017:2006 Taximeters

US 1018:2013 Medical syringes with glass barrels — Specification

US 1019:2006 Diaphragm gas meters

US 1020:2006 Rotary gas meters and turbine gas meters

US 1021:2014 Accuracy classes of measuring instruments — Principles for classification

US 1022-1:2013 Material measures of length for general use — Part 1: Metrological and technical requirements (2nd Edition)

US 1024:2006 Continuous totalizing automatic weighing instruments (belt weighers) - Part 1: Metrological and technical requirements – Tests

US 1025:2013 Moisture meters for cereal grain and oilseeds — Specification (2nd Edition)

US 1026:2006 Automatic gravimetric filling instruments - Part 1: Metrological and technical requirements – Tests

US 1027:2006 Fixed storage tanks – General requirements

US 1028:2013 Labelling requirements for prepackaged products (2nd Edition)

US 1029:2006 Road and rail tankers

US 1030:2013 Quantity of product in prepackages (2nd Edition)

US 1031:2006 Automatic rail weighbridges - Part 1: Metrological and technical requirements – Tests

US 1032:2006 Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and technical requirements – Tests

US 1033:2006 Standard capacity measures for testing measuring systems for liquids other than water

US 1034:2006 Automatic instruments for weighing road vehicles in motion - Total vehicle weighing

US 1035:2013 Wood moisture meters — General provisions for verification methods and equipment

US 1039:2013 Speedometers mechanical odometers and chronotachographs for motor vehicles — Metrological requirements

US 1042:2013 Alcoholometers and alcohol hydrometer; and thermometers for use in alcoholometry— Specification

US 1043:2014 Radar equipment for measurement of the speed of vehicles — Specification

US 1045:2014 Standard graduated glass flasks for verification officers — Specification

US 1047-1:2014 Dosimetry systems for ionizing radiation processing of materials and products ― Part 1: Radiochromic film dosimetry system ― Specification

US 1047-2:2014 Dosimetry systems for ionizing radiation processing of materials and products ― Part 2: Polymethylmethacrylate dosimetry system ― Specification

US 1047-3:2014 Dosimetry systems for ionizing radiation processing of materials and products ― Part 3: Alanine EPR dosimetry system ― Specification

US 1049:2014 Tungsten ribbon lamps for the calibration of radiation thermometers — Specification

US 1050:2014 Platinum copper and nickel resistance thermometers –Specification

US 1051:2014 Glass capillary viscometers for the measurement of kinematic viscosity — Verification method

US 1053:2014 Legal units of measurement— General provisions

US 1535:2013 Guidelines for the manufacture of finger-jointed structural timber

US 1537:2013 Softwood flooring boards — Specification

US 1539:2013 Wooden ceiling and panelling boards — Specification

US 1540:2013 Mechanical stress grading of softwood timber (Flexural method) — Code of practice

US 1560:2013 Rotational moulded polyethylene water storage tank — Specification

US 1622:2017 Glossary of terms in timber technology and utilization of wood bamboo and cane

US 1631:2015 Wheelchair seating — Clinical interface pressure mapping guidelines for seating

US 1632-1:2015 Wheelchairs — Part 1:Guidelines for the application of the US ISO 7176 series on wheelchairs

US 1632-2:2015 Wheelchairs — Part 2:Typical values and recommended limits of dimensions mass and manoeuvring space as determined in US ISO 7176-5

US 1641:2016 Biogas — Glossary abbreviations and fundamental principles

US 1642: 2016 Domestic biogas stoves — Specification

US 1643:2016 Domestic biogas lamps — Specification

US 1644-1:2016 Domestic biogas plants ― Design and construction — Code of practice ― Part 1: General

US 1644-2:2016 Domestic biogas plants design and construction — Code of practice — Part 2: Fixed dome

US 1644-3:2016 Domestic biogas plants design and construction — Code of practice — Part 3: Floating dome

US 1649:2016 Information technology — Distributed Application Platforms and Services (DAPS) — General technical principles of Service Oriented Architecture

US 1652-1:2017 Wooden flush door shutters (solid core type) — Part 1: Plywood face panels — Specification

US 1652-2:2017 Wooden flush door shutters (solid core type) — Part: 2: Particleboards and hardwood face panels — Specification

US 1657-1:2017 Wooden flush door shutters (cellular and hollow core type) — Part 1: Plywood face panels — Specification

US 1657-2:2017 Wooden flush door shutters (cellular and hollow core type) — Part 2: Particle boards and hardwood face panels — Specification

US 1663-1:2017 Aluminium and aluminium alloys — Part 1: Bare foil for food packaging — Specification

US 1671:2017 Plastic cling wrap film for food contact use — Specification

US 1672:2017 Copper and copper alloys — Copper rod bar and wire for general electrical purposes — Specification

US 1673-1:2017 Steel tubes for non-pressure purposes — Sections for scaffolding general engineering and structural applications — Part 1: Specification

US 1717:2017 Information and documentation — Implementation guidelines for digitization of records

US 7176-16:2012 Wheelchairs — Part 16: Resistance to ignition of postural support devices

US 7176-19 2008 Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles

US 7176-22:2014 Wheelchairs —Part 22: Set-up procedures

US 7176-26:2007 Wheelchairs — Part 26: Vocabulary

US 7176-28:2012 Wheelchairs — Part 28: Requirements and test methods for stairclimbing devices

GL Guidelines for inspection of imports 

National Physical Standards

US 1: 2011 National flag of Uganda – Specification

US EAS 24:2002Timber industry — Glossary of terms

US EAS 25:2000 School chalks — Specification

US EAS 31: 2013 Laundry soap — Specification (2nd Edition)

US 67:1999/ISO 684 Analysis of soaps- Determination of total free alkali

US 76:1999/ISO 673 Analysis of soaps – Determination of content of ethanol insoluble matter

US 83:1999/ISO 2811-1 Paints and Varnishes – Determination of density Part 1: Pyknometer method

US EAS 93-1:2000 Raw hides and skins —Code of practice — Part 1: By stack salting

US EAS 93-2:2000 Raw hides and skins —Code of practice — Part 2: By air-drying

US EAS 93-3:2000 Raw hides and skins —Codes of practice — Part 3: By pickling

US EAS 96:2009 Sanitary towels — Specification

US EAS 121:2006 Water for lead acid batteries — Specification (2nd Edition)

US EAS 122:1999 Sulfuric acid — Specification

US EAS 123:2006 Distilled water — Specification (2nd Edition)

US EAS 125: 2011 Safety matches — Specification

US 126:2003 Specification for Toilet paper

US 127:2000 National cheque –Specification

US EAS 127-1: 2013 Synthetic detergent powders — Specification — Part 1: Household hand use (2nd Edition)

US EAS 127-2:2014 Synthetic detergent powders — Specification — Part 2: Machine wash

US EAS 156-1:2000 Woven bags from natural fibres — Specification — Part 1: Woven bags for cereals

US EAS 156-2:2000 Woven bags from natural fibres — Specification — Part 2: Woven bags for milled products

US EAS 156-3:2000 Woven bags from natural fibres — Specification — Part 3: Woven bags for sugar

US EAS 158:2012 Automotive gasoline (Premium motor spirit) — Specification (2nd Edition)

US EAS 177:2012 Automotive gas oil (automotive diesel) —Specification (2nd Edition)

US EAS 184: 2011 Emulsion paints – Specification

US EAS 186: 2013 Toilet soap — Specification (2nd Edition)

US 189:2000/EAS 187:2000 Standard specification for toothpaste

US 191: 2016 Petroleum jelly — Specification (3rd Edition)

US 202-1:2015 Flexible polyurethane foams — Part 1: Polyether type — Specification

US 202-2:2015 Flexible polyurethane foam — Part 2: Mattresses — Specification

US 202-3:2015 Flexible polyurethane foams — Part 3: Reconstituted foams — Specification

US 202-4:2015 Flexible polyurethane foams — Part 4: Polyester type — Specification

US EAS 223:2001 Zippers — Specification

US EAS 225-1:2001 Umbrella fabrics — Specification — Part 1:Cotton fabrics

US EAS 225-2:2001 Umbrella fabrics — Specification — Part 2: Man-made fibre fabric

US EAS 225-3:2001 Umbrella fabrics — Specification — Part 3:Silk fabrics

US EAS 226:2001 Kitenge — Specification

US EAS 227:2001 Knitted cotton fabric — Specification

US EAS 228:2001 Cotton bed sheets — Specification

US EAS 229:2001 Crepe bandages — Specification

US 244:2000/EAS 154 Standard specification for baby napkins

US 245:2000/EAS 155:2000 Code of practice for grading of spun yarns

US 249:1999/EAS159 Engine oil- Specification

US EAS 253-1:2001 Code of practice for grading of textile materials — Part 1. Fabrics

US EAS 257: 2001 Methods for estimation of moisture total size for finish ash fatty matter and determination of water-soluble matter in textiles

US EAS 260:2007 Zippers — Glossary of terms

US EAS 272:2002 Timber — Determination of moisture content for physical and mechanical tests

US EAS 273:2002 Timber — Sampling methods and general requirements for physical and mechanical tests

US EAS 274:2002 Timber — Determination of the average moisture content of a lot

US EAS 275:2002 Timber — Determination of volumetric shrinkage

US EAS 290-2:2002 Polishes — Specification — Part 2: Floor polish solvent type (liquid and paste)

US EAS 290-3:2002 Polishes — Specification — Part 3: Floor polish water emulsion buffable type

US EAS 294:2002 Scouring powders — Specification

US EAS 295:2002 Sodium hypochlorite solutions for domestic use — Specification

US EAS 296:2011 Liquid household hand dishwashing detergent Specification

US 307:2014 Mosquito nets — Specification (3rd Edition)

US 308:2001 Standard specification for insecticide for treatment of mosquito nets

US 313:2006 Cigarettes – Specification (Amendment)

US EAS 334: 2013 List by category of cosmetic products

US EAS 335: 2013 Cologne — Specification

US EAS 336: 2013 Chemical depilatories — Specification

US EAS 337: 2013 Henna powder — Specification

US EAS 338: 2013 Chemical hair relaxers and hair waving products — Specification

US EAS 339: 2013 Hair creams lotions and gels — Specification

US EAS 340: 2013 Nail polish — Specification

US EAS 341: 2013 Nail polish removers — Specification

US EAS 342: 2013 Pomades and solid brilliantines — Specification

US EAS 345:2004 Toluene — Specification

US EAS 346: 2013 Labelling of cosmetics — General requirements

US EAS 356:2004 Code of practice for inspection and acceptance criteria for used textile products

US 356:2002 Size designation of clothes - Men's and boy outerwear garments

US 357:2002 Size designation of clothes -Women's and girl's outerwear garments

US 358:2002 Size designation of clothes -Infants garments

US 359:2002 Bed sheets and pillow cases specification

US 360:2002 Specification for knitted polyster/cellulosic blended fabric

US EAS 361:2004 Carbaryl dusting powders — Specification

US 363:2006 Household insecticidal aerosols — Specification

US EAS 377-1: 2013 Cosmetics and cosmetic products — Part 1: List of substances prohibited in cosmetic products

US EAS 377-2: 2013 Cosmetics and cosmetic products — Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down

US EAS 377-3: 2013 Cosmetics and cosmetic products — Part 3: List of colorants allowed in cosmetic products

US EAS 377-4: 2013 Cosmetics and cosmetics products — Part 4: List of preservatives allowed in cosmetic products

US EAS 377-5: 2013 Cosmetics and cosmetic products — Part 5: List of UV filters allowed in cosmetic products

US 380:2001/EAS 246 Method for determination of added oil content of sisal of jute yarn or fabric

US 382:2001/ EAS 240 Conditions for the testing of textiles

US EAS 383: 2013 Synthetic organic liquid detergent for household use — Specification

US 383:2001/EAS 251 Textile fabrics - Determination of resistance of fabrics to penetration - Hydrostatic head test

US EAS 384:2005 Disinfectants — Glossary of terms

US 384:2001/EAS 254 Method for determination of tear resistance of woven fabrics by falling pendulum (Elmendorf) apparatus

US 385:2001/ EAS 248 Methods for determination of threads per centimetre in woven fabrics

US EAS 385:2008 Footwear — Vocabulary

US 386 – 2:2001/EAS 243 Method for determination of colour fastness of textile materials to hot pressin

US EAS 386:2005 Used footwear ― Inspection and acceptance criteria ― Code of practice

US 387:2001/EAS 245 Method for determination of colour fastness of textile materials to washing

US 388:2001/EAS 247 Method for determination of colour fastness of textiles to peroxide washing (sodium perborate)

US 390-1:2002 Code of practice for grading of textile materials - Part 1: fabrics

US 417:2002 Woven fabrics -Description of defects –Vocabulary

US 418:2003 Knitted fabrics -Description of defects –Vocabulary

US 424:2002 Cotton khanga -specification

US 426:2002 Code of practice for fibre content labelling of textiles and textile products

US 432:2002 Glossary of terms used in paper industry and trade

US 434:2002 Specification for files and folders

US 435:2003 Duplicating paper –specification

US 441-2:2002/ISO 7211-2 Textiles -Woven fabrics - construction - Methods of analysis - Part 2: Determination of number of threads per unit length

US 441-3:2002/ISO 7211 Textiles -Woven fabrics -Construction -Method of analysis - Part 3: Determination of crimp of yarn in fabric

US 441-4:2002/ISO 7211-4 Textiles -Woven fabrics -Construction -Method of analysis - Part 4: Determination of twist in yarn removal from fabric

US 441-5:2002/ISO 7211-5 Textiles -Woven fabrics -Construction -Method of analysis Part 5: Determination of linear density of yarn removed from fabric

US 441-6:2002/ISO 7211 Textiles -Woven fabrics - Method of analysis Part: 6 Determination of the mass of warp and weft per unit area of fabric

US EAS 461-1: 2013 Hair dyes — Part 1: Aryl diamine based formulated powders — Specification

US 466:2006 Toothbrushes – Specification

US 483:2003 Ballpoint pens for general use –Specification

US 488:2003 Skin powders –specification - Part 2: Baby powders

US EAS 490:2008 Meter rules and rulers for school and office use — Specification

US 573:2017 Shoe polish — Specification (2nd edition)

US 574-1:2006 Wax polishes – Preparation of samples

US 574-3:2006 Wax polishes – Determination of Heat – cool stability

US 574-4:2006 Wax polishes – Penetration of wax (paste) polishes

US 575:2006 Polish paste for floor and wooden furniture – Specification

US 576:2006 Polishes and related materials -Glossary of terms

US 578:2006 Determination of tearing strength

US 583:2007 Footwear materials — Determination of collapsing load of domed shapes

US 584:2007 Footwear — Toe-puff and stiffener materials — Determination of shape retention

US 586:2007 Footwear — Measurement of distension and strength of grain of leather by the ball burst test (Metric units)

US 587:2007 Footwear — Determination of spigot holding strength of ladies' plastics moulded heel top-pieces

US 588:2007 Footwear — Determination of accumulated impact strength of ladies' shoeheels of height greater than 25 mm

US 589:2007 Footwear — Determination of moisture stability of insoles and shank boards

US 591:2007 Textile fabrics — Abrasion resistance of textile fabrics (Martindale test)

US 595:2007 Footwear — Determination of bending modulus of steel shanks

US 596:2007 Footwear — Determination of resilience of steel shanks

US 623:2006 Abrasion resistance of textile shoelaces (without core) and similar articles

US 624:2006 Chrome tanned bend outer sole leather

US 625:2006 Leather – Determination of sulphated total ash and sulphated water insoluble ash

US 626:2006 Determination of ether insoluble matter content (PVC upper outer sole and heel materials)

US 627:2006 Pull off strength for ladies shoe heels

US 628:2006 Determination of total ash content (PVC upper outer sole and heel materials)

US 629:2006 Leather and fibre board – Measurement of thickness

US 630:2006 Vegetable tanned bend outer sole leather

US 631:2006 Determination of heat insulation of granulated cork bottom filler for footwear

US 634:2006 Specification for plastic monobloc chairs

US 637:2006 Bathing bars – Specification

US 638:2006 Household washing bars – Specification

US 653:2006 Disinfectants – Quaternary ammonium based – Specification

US 655:2006 Method for the sampling of leather and other footwear materials

US 656:2006 Preparation of samples (leather elastomeric materials and other footwear materials)

US 657:2006 Determination of water content in leather

US 658:2006 Determination of sulphated ash content of water soluble in water in leather (Metric units)

US 659:2006 Leather — Matter extractable by petroleum ether

US 660:2006 Determination of water-soluble matter content in leather

US 696:2006 Abrasion resistance of footwear materials (Martindale)

US 673:2007 Footwear — Determination of welt stitch tear strength (leather leather board fibre board)

US 674:2007 Footwear materials — Determination of wet compressibility of leather and fibre boards (Metric units)

US 675:2007 Footwear — Determination of shrinkage temperature of leather

US 676:2007 Footwear — Determination of flex resistance (leather fibre board and cellulose fibre board inner soles)

US 677:2007 Footwear — Determination of wet and dry bursting strength of stiffeners (Metric units)

US 678:2007 Footwear — Determination of water absorption of inner soles and inner-sole material (Metric units)

US 704: 2014; Absorbent cotton wool — Specification

US 706:2011 Non-woven surgical dressings — Specification

US 711:2007 General requirements for fitness for purpose of products

US 719:2007 Footwear — Soling material —Determination of hot contact resistance

US 720:2007 Footwear — Determination of corrosion resistance of metallic components of rubber and safety footwear

US 721:2007 Footwear materials — Determination of absorption and desorption of water

US 722:2007 Footwear materials — Determination of water vapour absorption

US 723:2007 Footwear materials — Determination of water vapour coefficient

US 728:2007 Leather — Determination of adhesion of finish

US 729:2007 Leather — Determination of water absorption [Kubelka apparatus (Metric units)

US 743:2007 Decorative high gloss paints — Specification

US 745-1:2007 Road and runway marking paints — Specification — Part 1: Single pack solvent borne and water-borne paints

US 745-2:2007 Road and runway marking paints — Specification — Part 2: Single pack water borne paints

US 756:2007 Urea fertilizer grade — Specification

US 757:2007 Ammonium sulphate nitrate fertilizer — Specification

US 758:2007 Calcium ammonium nitrate fertilizer — Specification

US 759:2007 Monoammonium phosphate (MAP) and diammonium phosphate fertilizer — Specification

US 760:2007 Potassium chloride (muriate of potash) fertilizer grade — Specification

US 762:2007 Illuminating candles — Specification

US 766:2007 Plastic basins — Specification

US EAS 766-1: 2013 Antibacterial toilet soap — Specification — Part 1: Solid

US EAS 766-2: 2013 Antibacterial toilet soap — Specification ― Part 2: Liquid

US 767-1:2007 Safety razor blades and razors — Part 1: Blades — Specification

US 767-2:2007 Safety razor blades and razors— Part 2: Razors— Specification

US 768:2007 Insulated flasks — Specification

US 773:2007 Flat and carrier plastic bags — Specification

US EAS 786: 2013 Skin care creams lotions and gels — Specification

US 786:2008 Plastics — Codes for resin identification on plastics containers

US EAS 787: 2013 Synthetic industrial detergent powder — Specification

US EAS 788: 2013 Synthetic detergent paste — Specification

US EAS 789: 2013 Instant hand sanitizers — Specification

US EAS 790: 2013 Liquid soap — Specification

US: 790:2007 Paints and varnishes — Determination of dynamic of viscosity liquids — Stormer viscometer method

US: 791:2007 Paints and varnishes — Determination of resistance to cold water

US EAS 791: 2013 Oven cleaner and grease remover — Specification

US EAS 792: 2013 Carpet and upholstery shampoo — Specification

US 792:2007 Paints and varnishes — Determination of wet hiding power (brush-out method)

US 793:2007 Paints and varnishes — Determination of traffic wear index

US EAS 793-1: 2013 Toilet cleansers ― Specification ― Part 1: Acidic liquid toilet cleansers

US EAS 794: 2013 Determination of the microbial inhibition of cosmetic soap bars and liquid hand and body washes — Test method

US 798:2007 Paints and varnishes – Determination of brush and roller application properties

US 799:2007 Paints and varnishes – Determination of skid resistance

US 800:2007 Paints and varnishes — Determination of retro-reflected luminance by means of portable retro-reflectometer

US 801:2007 Paints and varnishes — Determination of daylight 45° 0° luminous directional reflectance of surface coatings and pigments

US 803:2008 Kerosene for domestic heating and illuminating (BIK)

US EAS 812-1:2015 Liquid hand wash — Specification — Part 1: Synthetic and combined (soap and synthetic) hand wash

US EAS 814:2015 Determination of biodegradability of surfactants — Test method

US EAS 815: 2015 Soap noodles — Specification

US EAS 816-1: 2015 Synthetic liquid laundry detergents — Specification — Part 1: Hand wash

US EAS 816-2:2015 Synthetic liquid laundry detergents — Specification — Part 2: Machine wash

US EAS 817:2015 Stain remover for tableware — Specification

US 820:2008 Scholastic stationery — Specification

US 821:2008 Bond paper — Specification

US 841:2009 Requirements for packaging and labelling of tobacco products

US 842:2009 General requirements for the production distribution publishing and filing of audio/audiovisual works of art

US EAS 848:2016 Water-thinned priming paints for wood — Specification

US EAS 849:2016 Silk (sheen) emulsion paint for interior use — Specification

US EAS 850:2016 Matt solvent-borne paint for interior and exterior use — Specification

US EAS 851:2016 Matt emulsion paint for interior and exterior use — Specification

US EAS 852: 2016 Air-dried roofing paint — Specification

US EAS 853-1:2016 Auto-refinishing paint — Specification — Part 1: Synthetic resin based

US EAS 853-2:2016 Auto-refinishing paint — Specification — Part 2: Nitrocellulose resin based

US EAS 854:2016 Thinner for nitrocellulose resin-based paints and lacquers — Specification

US EAS 855:2016 Thinner for synthetic resin-based auto-refinishing paints — Specification

US EAS 856: 2016 2-Pack acrylic resin based auto-refinishing paint — Specification

US EAS 857:2016 Thinner for acrylic resin based auto-refinishing paints — Specification

US 874:2009 Methods of test for safety evaluation of cosmetics

US 875:2009 Lipstick — Specification

US 883-1:2011 Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution

US 883-2:2011 Single-use medical examination gloves — Part 2: Specification for gloves made from poly (vinyl chloride)

US 914-1:2011 Bed blankets — Part 1 — Specifications of blankets made from suitable flame resistant fabrics

US 914-2:2011 Bed blankets — Part 2 – Specifications for blankets made from wool and wool/polyamide.

US 915-1:2011 Resilient floor coverings — Expanded (cushioned) polyvinyl chloride floor covering — Specification

US 916:2011 Specification for denatured fuel ethanol as used for blending with gasoline

US 918:2011 Textiles — Fabrics for household curtains and drapery — Specification

US 925:2012 Chemicals used for treatment of water intended for human consumption — Sodium hypochlorite — Specification

US 926:2012 Chemicals used for treatment of water intended for human consumption — Polyamides — Specification

US 933:2011 Gasohol — Specification for E5 and E10

US 946:2011 Specification for biodiesel fuel as used for blending with automotive gas oil

US 947-1:2011 Handling of petroleum products and their derivatives — Part 1: Sitting design and construction of service station

US 948-1:2011 Textiles — Sewing threads — Part 1: Sewing thread made wholly or partly from synthetic fibres — Specification

US 949-1:2011 Textiles — Upholstery fabrics — Part 1: Plain tufted or flocked woven upholstery fabrics — Specification

US 949-2:2011 Textiles — Upholstery fabrics — Part 2: Knitted upholstery fabric — Specification

US 950:2011 Disposable baby diapers — Specification

US 966-1:2011 Medical devices — Surgical gowns drapes and clean air suits — Part 1: General requirements

US 966-2:2011 Medical devices — Surgical gowns drapes and clean air suits — Part 2: Test methods

US 966-3:2011 Medical devices — Surgical

US 971-4:2014 Liquefied Petroleum Gases (LPG) — Part 4: Specification

US 1511:2014 Oxygen for medical use — Specification

US 1512:2014 Adhesives — Ethyl & methyl cyanocrylate types 12 and 3 — Specification

US 1532:2013 Hair extensions — Specification/ Amendment 1  2014-04-14

US 1564:2014 Standard performance specification for men’s women’s and children’s woven handkerchief fabrics

US 1565:2014 Standard specification for water emulsion floor polish

US 1570:2014 Standard consumer safety specification for soft infant and toddler carriers

US 1571:2014 Standard test method of field testing topical applications of compounds as repellents for medically important and pest arthropods (including insects ticks and mites): I Mosquitoes

US 1572:2014 Standard specification for epoxy (flexible) adhesive for bonding metallic and non- metallic materials

US 1574:2014 Standard performance specification for towel products for institutional and household use

US 1575:2014 Spring mattresses — Specification

US 1578-1:2017 Pillows for domestic use — Specification — Part 1: Synthetic-fibre filled

US 1578-2:2017 Pillows for domestic use — Specification — Part 2: Plumage filled

US 1583:2014 Fishing nets —Specification

US 1608:2015 Men's women's and children’s leather belts — Specification

US 1623-1:2015 Hair dyes — Liquid oxidation hair dyes — Part 1: Aryl di-amine based— Specification

US 1624-1:2015 Hair Shampoo — Part 1: Synthetic detergent-based — Specification

US 1625:2015 Acid based instant hand sanitizers— Specification/ Amend. 1 2015-12-14/Replaces “Acid-based” with “Anti bacterial and Anti viral” in the title

US 1650:2016 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

US 1654-1:2017 Footwear — Specification for men’s shoes — Part 1: Closed shoes

US 1654-2:2017 Footwear — Specification for men’s shoes — Part 2: Open shoes

US 1655-1:2017 Footwear — Specification for ladies’ shoes — Part 1: Closed shoes

US 1655-2:2017 Footwear — Specification for ladies’ shoes — Part 2: Open shoes

US 1656-1:2017 Footwear — Specification for children’s shoes — Part 1: 2 years and below

US 1656-2:2017 Footwear — Specification for children’s shoes — Part 2: Between 2 and 6 years

US 1685:2017 Standard Specification for Denatured Ethanol for use as Cooking and Appliance Fuel

US 1686:2017 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

US 1689:2017 Standard Test Method for the Distillation of Volatile Organic Liquids

US 1690:2017 Standard Test Method for Determination of the Ash Content of adhesives

US 1692:2017 Determination of bactericidal efficacy of disinfectants/sanitizers

US 1693:2017 Disinfectants/sanitizers — Specification

US 1696:2017 Standard Test Method for Pour Point of Crude Oils

US 1697:2017 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

US 1709:2017 Disinfectants/sanitizers based on iodophors — Specification

US 1710:2017 Disinfectants/sanitizers based on glutaraldehyde for general use — Specification

US 1711:2017 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

US 1713:2017 Standard Test Method for Flexibility and Adhesion of finish on Leather

US 1714:2017 Standard Test Method for Calculation of (Non mineral) Combined Tanning Agents and Degree of tannage

US 1724:2017 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

US 1725:2017 Standard Guide for Use of the Petroleum Measurement Tables

US 1726:2017 Standard Test Method for Density Relative Density or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

US 1727:2017 Standard Test Method for Density Relative Density and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

US 1728:2017 Standard Specification for Liquid-in-Glass Thermometers

US 1729:2017 Standard Specification for Hydrometers

US 1730:2017 Standard Test Method for Pour Point of Petroleum Products

US 1731:2017 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

US 1732:2017 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

US 1733:2017 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

US 1734:2017 Standard Test Method for Inspection and Verification of Thermometers

US 1736:2017 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

US 1737:2017 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

US 1739:2017 Standard Test Method for Density Relative Density and API Gravity of Liquids by Digital Density Meter

US 1740:2017 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

US 1741:2017 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

US 1742:2017 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

US 1743:2017 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

US 1744:2017 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

US 1745:2017 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

US 1746:2017 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

US 1747:2017 Standard Practice for Statistical Assessment and Improvement of Expected Agreement between Two Test Methods that Purport to Measure the Same Property of a Material

US 1748:2017 Standard Test Method for Gum Content in Fuels by Jet Evaporation

US 1749:2017 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

US 1750:2017 Standard Test Method for Determination of MTBE ETBE TAME DIPE tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

US 1751:2017 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

US 1752:2017 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

US 1753:2017 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

US 1754:2017 Standard Practice for Sampling Industrial Chemicals

US 1755:2017 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration

US 1758:2017 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

MANAGEMENT SYSTEM STANDARDS

US 534:2008 Occupational health and safety management systems — Specification

US 536:2014 Occupational health and safety management systems — Guidelines for the implementation of US 534

US 701-1:2008 Code of practice for disaster management — Part 1: Terminology and Implementation

US 701-2:2008 Code of practice for disaster management — Part 2: All-risk emergency operation planning

US 701-3:2008 Code of practice for disaster management — Part 3: Hazard-specific response planning

US 701-4:2008 Disaster management — Part 4: Standard specification for handling disasters

US 713:2008 Requirements for hygiene in commercial skin penetration hairdressing and beauty and natural therapy

US 809:2013 Code of practice for the management of swimming and spa pools

US 810: 2011 Guidelines for cleaning and disinfection

US 851:2009 Garages services – General guidelines for service maintenance and repair of vehicles and related equipment

US 852:2009 Cleaning chemicals for use in the food industry

US 865:2009 Efficacy of cleaning plant equipment and utensils: Swab technique (Metric units)

US 870:2009 Quality management systems – Requirements for cleaning service organizations

US 892:2009 Cleaning and maintenance of floors

US 909:2011 General standard for Halal food

US 910:2011Guidelines for bodies providing Halal Certification

US 911:2011 Guidelines for the Halal Accreditation Body accrediting Halal Certification Bodies

US 929:2011 Health and safety at events — Requirements

US 942:2012 Code of Practice for official statistics

US 943:2012 Guidelines for production of quality statistics

US 944:2013 Sanitation of bed and breakfast establishments

US 957:2011 Social Responsibility – Organizational accountability at the work place

US 996-1:2012 Halaal consumer goods — Part 1: Cosmetic and personal care — General guidelines

US 996-2:2015 Halal consumer goods — Part 2: Usage of animal bone skin and hair – General guidelines

US 1531:2013 Child care — Safety of transportation — Requirements

US 1544:2015 Guidelines for manufacturing and handling of halal medicinal products traditional medicines and health supplements

US 1551:2013 Hygiene practice in food service establishments and catering services ― Code of practice

US 1552:2015 First aid facilities and services — Code of practice

US 1553:2015 Workplace amenities and facilities — Code of practice

US 1575:2016 Occupational safety for onshore oil and gas production operations — Requirements

US 1581:2015 Halalan – Toyyiban assurance pipeline- Part 1: Management system requirements for transportation of goods and /or cargo chain services

US 1585:2017 Environmental protection — Onshore oil and gas production operations — Requirements

US 1629:2015 Petroleum and natural gas industries — Classification and conformity assessment of products processes and services

US 1630:2015 Petroleum petrochemical and natural gas industries — Reliability modelling and calculation of safety systems


版权所有Copyright@2016杭州诺莫检测技术有限公司  浙ICP备10001327号-4   XML地图

电话:+86-571-85691658  邮箱:service@normaltci.com   服务热线:400-6177-880  传真:+86-571-28867000

如对本网站有任何意见欢迎电邮至:service@normaltci.com

在线咨询

  • QQ
  • QQ
  • 咨询电话:
  • 400-6177-880