Pipe test

Common testing items

Carbon black content

volatile content

Carbon black dispersibility

Dispersibility of dyes

Diameter and wall thickness

blast test

Defect testing

Withstand Voltage Test

Long term voltage withstand test

Resistant to environmental stress cracking

Strength, adhesion, and stretchability

Anti knot

flame retardancy

bending resistance

ozone-resistant

Common testing standards

AS 4176-1994 Pressure resistant polyethylene aluminum-plastic composite pipes and adhesive bonded polyethylene aluminum-plastic composite pipe systems

UL 224 ISBN 0-7629-0315-5 extruded insulation pipe PVC non heat shrinkable pipe

ASTM D380 Rubber Hose Testing Method

GB/T 10002.1-1996 PVC-U pipes for water supply

test product

Aluminum plastic composite pipe, rigid polyvinyl chloride pipe

PVC heat shrink tubing

PVC U-shaped pipe

PE polyethylene pipe

PP polypropylene pipe

Standard Number Standard Name

CJ/T 108 Aluminum plastic Composite Pressure Pipe (Overlap Welding)

CJ/T 120 water supply coated composite steel pipe

CJ/T 123 Steel Skeleton Polyethylene Plastic Composite Pipe for Water Supply

CJ/T 125 Steel Skeleton Polyethylene Plastic Composite Pipe for Gas Use

CJ/T 126 Steel skeleton polyethylene plastic composite pipe fittings for gas use

CJ/T 136 Water supply lined plastic composite steel pipe

CJ/T 137 Plastic lined malleable cast iron fittings for water supply

CJ/T 165 High Density Polyethylene Wrapped Structural Wall Pipe

CJ/T 175 Heat resistant polyethylene (PE-RT) piping system for hot and cold water

CJ/T 181 Perforated steel strip polyethylene composite pipe for water supply

CJ/T 189 Steel Wire Mesh Skeleton Plastic (Polyethylene) Composite Pipes and fittings

CJ/T 195 Outer layer fusion type aluminum-plastic composite pipe

CJ/T 205 Cross linked Polyethylene (PE-X) Pipes for Building Water Supply

CJ/T 225 Steel Strip Reinforced Polyethylene (PE) Spiral Bellows for Underground Drainage

CJ/T 250 High density polyethylene (HDPE) pipes and fittings for building drainage

CJ/T 258 Fiber Reinforced Random Polypropylene Composite Pipe

CJ/T 270 Polyethylene Plastic Steel Wrapped Drainage Pipe

CJ/T 272 Impact resistant modified polyvinyl chloride (PVCM) pipes and fittings for water supply

CJ/T 273 Polypropylene Silent Drainage Pipe and Fitting

CJ/T 317 Polyethylene pipes and fittings for ground source heat pump systems

CJ/T 329 Buried Double Flat Wall Steel Plastic Composite Wrapped Drainage Pipe

DL/T 802.1 Technical specifications for conduits for power cables - Part 1: General principles

DL/T 802.2 Technical specifications for conduits for power cables - Part 2: Glass fiber reinforced plastic cable conduits

DL/T 802.3 Technical specifications for conduits for power cables - Part 3: Chlorinated polyvinyl chloride and rigid polyvinyl chloride plastic cable conduits

DL/T 802.4 Technical specifications for conduits for power cables - Part 4: Chlorinated polyvinyl chloride and rigid polyvinyl chloride plastic double wall corrugated cable conduits

DL/T 802.5 Technical specifications for conduits for power cables - Part 5: Fiber cement cable conduits

DL/T 802.6 Technical specifications for conduits for power cables - Part 6: Plug and socket precast concrete cable conduits

DL/T 802.7 Technical specifications for conduits for power cables - Part 7: Non excavation modified polypropylene plastic cable conduits

GB 15558.1 Underground Polyethylene (PE) Pipeline Systems for Gas Use Part 1: Pipe Materials

GB 15558.2 Underground Polyethylene (PE) Pipeline Systems for Gas Use Part 2: Pipe fittings

GB/T 10002.1 PVC-U pipes for water supply

GB/T 10002.2 PVC-U fittings for water supply

GB/T 1033.1 Plastics - Determination of density of non cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method

GB/T 1034 Test Method for Water Absorption of Plastics

GB/T 1040.1 Determination of Tensile Properties of Plastics Part 1: General Principles

GB/T 1040.2 Determination of Tensile Properties of Plastics Part 2: Test Conditions for Molding and Extrusion Plastics

GB/T 1040.3 Determination of Tensile Properties of Plastics Part 3: Test Conditions for Thin Films and Sheets

GB/T 1040.4 Determination of tensile properties of plastics Part 4: Test conditions for isotropic and orthotropic fiber-reinforced composites

GB/T 1040.5 Determination of Tensile Properties of Plastics Part 5: Test Conditions for Unidirectional Fiber Reinforced Composite Materials

GB/T 1041 Determination of Compressive Properties of Plastics

GB/T 1043.1 Determination of Impact Performance of Plastic Simply Supported Beams Part 1: Non Instrumented Impact Test

GB/T 10654 Determination of tensile strength and elongation at break of polymer porous elastic materials

GB/T 11547 Determination of Resistance of Plastics to Liquid Chemical Reagents

GB/T 11548 Test method for impact resistance of rigid plastic sheets - Drop hammer method

GB/T 13021 Determination of carbon black content in polyethylene pipes and fittings (thermogravimetric method)

GB/T 13526 Test Method for Dichloromethane Immersion of PVC-U Pipes

GB/T 13663 Polyethylene (PE) pipes for water supply

GB/T 13663.2 Polyethylene (PE) piping systems for water supply - Part 2: Pipe fittings

GB/T 13664 Hard Polyvinyl Chloride (PVC-U) Pipes for Low Pressure Water Transfer Irrigation

GB/T 1408.1 Test Method for Electrical Strength of Insulation Materials - Power Frequency Test

GB/T 1410 Solid Insulation Materials - Test Methods for Volume and Surface Resistivities

GB/T 14152 Test Method for External Impact Resistance of Thermoplastic Pipes - Clockwise Rotation Method

GB/T 14153 General rules for drop hammer impact test method of hard plastics

GB/T 1447 Test Method for Tensile Properties of Fiber Reinforced Plastics

GB/T 1448 Test Method for Compressive Properties of Fiber Reinforced Plastics

GB/T 1449 Test Method for Bending Properties of Fiber Reinforced Plastics

GB/T 1451 Fiber reinforced plastics - Test method for impact toughness of simply supported beams

GB/T 1458 Test method for mechanical properties of circular specimens of fiber-reinforced plastics

GB/T 1463 Test Method for Density and Relative Density of Fiber Reinforced Plastics

GB/T 1549 Methods for Chemical Analysis of Fiberglass

GB/T 15560 Plastic pipes for fluid transportation - Hydraulic instantaneous burst and pressure resistance test method

GB/T 15820 Tensile strength test for polyethylene pressure pipes and fittings connections

GB/T 1633 Test Method for Softening Point (Vicat) of Thermoplastic Materials

GB/T 1634.1 Determination of Load Deformation Temperature of Plastics Part 1: General Test Method

GB/T 1634.2 Determination of Load Deformation Temperature of Plastics Part 2: Plastics, Hard Rubber and Long Fiber Reinforced Composite Materials

GB/T 1634.3 Determination of deformation temperature of plastics under load Part 3: High strength thermosetting laminates

GB/T 16422.2 Plastics Laboratory Light Source Exposure Test Method Part 2: Xenon Arc Lamp

GB/T 16422.3 Plastics Laboratory Light Source Exposure Test Method Part 3: Fluorescent UV Lamp

GB/T 16800 Core layer foamed rigid polyvinyl chloride (PVC-U) pipes for drainage

GB/T 17219 Safety Evaluation Standards for Drinking Water Transmission and Distribution Equipment and Protective Materials

GB/T 17391 Test method for thermal stability of polyethylene pipes and fittings

GB/T 1843 Determination of Impact on Plastic Cantilever Beams

GB/T 18474 Test method for crosslink degree of cross-linked polyethylene (PE-X) pipes and fittings

GB/T 18476 Polyolefin pipes for fluid transport - Determination of resistance to crack propagation - Test method for slow crack growth of notched pipes (notch test)

GB/T 18477.1 Unplasticized polyvinyl chloride (PVC-U) double wall corrugated pipes for buried drainage

GB/T 18477.3 Rigid polyvinyl chloride (PVC-U) structural wall piping systems for buried drainage - Part 3: Double layered axial hollow wall pipes

GB/T 18742.2 Polypropylene piping systems for hot and cold water - Part 2: Pipes

GB/T 18742.3 Polypropylene piping systems for hot and cold water - Part 3: Pipe fittings

GB/T 18743 Thermoplastic pipes for fluid transport - Impact test method for simply supported beams

GB/T 18992.2 Cross linked polyethylene (PE-X) pipes for hot and cold water

GB/T 18993.2 Chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water - Part 2: Pipes

GB/T 18993.3 Chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water - Part 3: Pipe fittings

GB/T 18997.1 Aluminum plastic composite pressure pipes Part 1: Aluminum tube lap welded aluminum-plastic pipes

GB/T 18997.2 Aluminum plastic composite pressure pipes Part 2: Aluminum tube butt welded aluminum-plastic pipes

GB/T 18998.2 Chlorinated polyvinyl chloride (PVC-C) piping systems for industrial use - Part 2: Pipes

GB/T 18998.3 Chlorinated polyvinyl chloride (PVC-C) piping systems for industrial use - Part 3: Pipes

GB/T 19466.1 Plastic Differential Scanning Calorimetry (DSC) Part 1: General Principles

GB/T 19466.2 Plastic Differential Scanning Calorimetry (DSC) Part 2: Determination of Glass Transition Temperature

GB/T 19466.3 Determination of melting and crystallization temperature and enthalpy

GB/T 19466.6 Plastics - Differential Scanning Calorimetry (DSC) - Part 6: Determination of Oxidation Induction Time (Isothermal OIT) and Oxidation Induction Temperature (Dynamic OIT)

GB/T 19472.1 Polyethylene (PE) structural wall piping systems for buried use Part 1: Polyethylene double wall corrugated pipes

GB/T 19472.2 Polyethylene (PE) structural wall piping systems for buried use Part 2: Polyethylene wrapped structural wall pipes

GB/T 19473.2 Polybutene (PB) piping systems for hot and cold water - Part 2: Pipe materials

GB/T 19473.3 Polybutene (PB) piping systems for hot and cold water - Part 3: Pipe fittings

GB/T 19808 Plastic pipes and fittings - Tensile peel test for polyethylene electrofusion components with a nominal outer diameter greater than or equal to 2250px

GB/T 19810 Polyethylene (PE) pipes and fittings - Determination of tensile strength and failure mode of hot melt butt joints

GB/T 20207.1 Acrylonitrile Butadiene Styrene (ABS) Pressure Piping Systems Part 1: Pipe Materials

GB/T 20207.2 Acrylonitrile Butadiene Styrene (ABS) Pressure Piping Systems Part 2: Pipe fittings

GB/T 20221 Unpressurized buried polyvinyl chloride (PVC-U) pipes for sewage and drainage

GB/T 21238 Glass Fiber Reinforced Plastic Sand Pipe

GB/T 21492 Glass Fiber Reinforced Plastic Top Pipe

GB/T 2406.1 Determination of Combustion Behavior of Plastics by Oxygen Index Method Part 1: Guidelines

GB/T 2406.2 Determination of Combustion Behavior of Plastics by Oxygen Index Method Part 2: Room Temperature Test

GB/T 2408 Determination of Burning Behavior of Plastics Horizontal and Vertical Methods

GB/T 241 Hydraulic Test Method for Metal Tubes

GB/T 2410 Test method for transmittance and haze of transparent plastics

GB/T 2411 Plastics and hard rubber - Determination of indentation hardness using a hardness tester (Shore hardness)

GB/T 242 Metal Tube Expansion Test Method

GB/T 244 Metal Tube Bending Test Method

GB/T 24452 Chlorinated polyvinyl chloride (PVC-C) pipes and fittings for sewage and wastewater (high and low temperature) inside buildings

GB/T 246 Metal Tube Flattening Test Method

GB/T 2576 Test Method for Insoluble Content of Fiber Reinforced Plastic Resin

GB/T 2577 Test Method for Resin Content of Glass Fiber Reinforced Plastics

GB/T 3091 Welded Steel Pipes for Low Pressure Fluid Transport

GB/T 3354 Test Method for Tensile Properties of Oriented Fiber Reinforced Plastics

GB/T 3356 Test Method for Bending Properties of Unidirectional Fiber Reinforced Plastics

GB/T 3398.2 Determination of Plastic Hardness Part 2: Rockwell Hardness

GB/T 3682 Determination of Mass Flow Rate and Volume Flow Rate of Thermoplastic Melts

GB/T 3854 Test Method for Barcol Hardness of Reinforced Plastics

GB/T 3960 Plastic Sliding Friction and Wear Test Method

GB/T 4219.1 Industrial rigid polyvinyl chloride (PVC-U) piping systems Part 1: Pipes

GB/T 5351 Fiber reinforced thermosetting plastic pipes - Short term hydrostatic failure pressure test method

GB/T 5352 Fiber Reinforced Thermosetting Plastic Pipe Parallel Plate External Load Performance Test Method

GB/T 5836.1 PVC-U pipes for building drainage

GB/T 5836.2 PVC-U fittings for building drainage

GB/T 6040 General rules for infrared spectroscopic analysis methods

GB/T 6111 Test Method for Resistance to Internal Pressure of Thermoplastic Pipes for Liquid Transport

GB/T 6344 Determination of Tensile Strength and Elongation at Break of Flexible foam Polymer Materials

GB/T 6671 Determination of Longitudinal Shrinkage of Thermoplastic Pipes

GB/T 7141 Plastic Thermal Aging Test Method

GB/T 8801 Drop test method for rigid polyvinyl chloride (PVC-U) fittings

GB/T 8802 Thermoplastic pipes and fittings - Determination of Vicat softening temperature

GB/T 8803 Injection molded rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), acrylonitrile butadiene styrene (ABS) and acrylonitrile styrene acrylate (ASA) fittings - Hot oven test method

GB/T 8804.1 Determination of Tensile Properties of Thermoplastic Pipes Part 1: General Principles of Test Methods

GB/T 8804.2 Determination of tensile properties of thermoplastic pipes - Part 2: PVC-U, PVC-C and PVC-HI pipes

GB/T 8804.3 Determination of Tensile Properties of Thermoplastic Pipes Part 3: Polyolefin Pipes

GB/T 8806 Plastic piping systems - Determination of dimensions of plastic components

GB/T 8924 Test method for combustion performance of fiber-reinforced plastics Oxygen index method

GB/T 9341 Determination of flexural properties of plastics

GB/T 9345.1 Determination of Ash Content in Plastics Part 1: General Methods

GB/T 9647 Determination of Ring Stiffness of Thermoplastic Pipes

HG/T 3862 Plastic Yellow Index Test Method

ISO 11358 General Principles for Thermal Analysis (TG) of Plastic Polymers

JC/T 988 Fiberglass Protective Tubes for Cables

JG 3050 Insulated electrical conduit and accessories for buildings

JT/T 496 Highway Underground Communication Pipeline High Density Polyethylene Silicon Core Plastic Pipe

QB/T 1916 Polyvinyl chloride (PVC-U) double wall corrugated pipe

QB/T 1929 Polypropylene (PP) pipes for buried water supply

QB/T 2479 Chlorinated polyvinyl chloride (PVC-C) conduit for buried high power cables

QB/T 2480 PVC-U rainwater pipes and fittings for building use

QB/T 2667.1 Porous integrated plastic pipes for buried communication - Part 1: Polyvinyl chloride (PVC-U) porous integrated pipes

QB/T 2667.2 Porous integrated plastic pipes for buried communication - Part 2: Polyethylene (PE) porous integrated pipes

QB/T 2782 Reinforced polyvinyl chloride (PVC-U) pipes for buried use

QB/T 2803 Method for Measuring the Bending Degree of Rigid Plastic Pipes

QB/T 3801 Corrosion Test Method for Hard Polyvinyl Chloride Pipes for Chemical Industry

SH/T 1750 Random copolymer polypropylene (PP-R) special material for hot and cold water pipeline systems

YD/T 1324 Rigid Polyvinyl Chloride (PVC-U) Porous Pipe for Underground Communication Pipelines

YD/T 841.1 Plastic pipes for underground communication pipelines Part 1: General principles

YD/T 841.2 Plastic pipes for underground communication pipelines Part 2: Solid wall pipes

YD/T 841.3 Plastic pipes for underground communication pipelines Part 3: Double walled corrugated pipes

YD/T 841.5 Plastic pipes for underground communication pipelines Part 5: Plum blossom pipes

Please consult NormalTCI for specific questions

National Unified Service Hotline: 400-6177-880

Email： service@normaltci.com