Building hardware

BS EN 1935/ANSI-BHMA A156.1,7,17,20,26/QB-T 2189 hinges

ASTM F883-04/ASTM F2348-04/EN 12320/AS 4145.4 padlock

BS EN 12209/EN1303/ANSI-BHMA A156.2,5,12,13/QB-T 2474 Locks

BS EN 1154/CNS 4723 A 2065/ANSI-BHMA A 156.4 Door Locks

ANSI-BHMA A156.16/BS EN12051 screws

ANSI/BHMA A156.9, 11 Kitchen Cabinet Use

EN 12209:2003 "Building Hardware - Locks and Spring Latches - Mechanical Locks, Spring Latches and Lock Plates - Requirements and Test Methods"

EN 13126.3:2004 "Transmission (sliding button operating accessories)"

EN 13126.4:2004 "Transmission Devices"

EN 13126.5:2004 "Limiting Devices for Door and Window Openings"

EN 13126.6:2004 "Deformable strut hinges"

EN 13126.8:2004 "Internal Flat Open, Lower Suspended, Internal Flat Open, and Internal Flat Open Hardware"

EN 13126.10:2004 "Arm Balance Systems"

EN 13126.11:2004 "Bidirectional Hardware for External Suspended Windows"

EN 13126.12:2004 "Bidirectional Hardware for External casement Windows"

EN 13126.2:2004 "External window handle"

EN 13126.17:2008 "Hardware components for inward sliding doors and windows"

EN 13126.16:2008 "Hardware components for lifting sliding doors and windows"

EN 13126.7:2007 "Window Hook Gripper"

EN 13126.9:2004 "Lower hinges"

EN 13126.13:2004 "Window sash balancer"

EN 13126.14:2004 "Window Locks"

EN 13126.15:2008 "Horizontal sliding and folding sliding door and window pulleys"

ANSI/BHMA A156.4-2000, EN 1154-2002 "Requirements and Test Methods for Gate Control Devices and Door closers", "Gate Control Door closers"

EN 1154-2002 "Requirements and test methods for ground springs of door control devices"

EN 1527:1998 Sliding and folding door hardware

EN 1935:2002 "Single axis hinges"

EN 1906:2002 "Requirements and Test Methods for Building Hardware Handle and Knob Devices"

ANSI/BHMA A156.1-2006 American National Standard: hinges

ANSI/BHMA A 156.2-2003 American National Standard: Pre installed door locks and ball locks

ANSI/BHMA A156.5-2001 American National Standard: Auxiliary Locks and Related Products

BS EN 1303:2005+AC: 2008 Building Hardware - Testing Requirements and Methods for Lock Cylinders

EN 14846:2008 Building Hardware Locks and locking pins Electric mechanical lock and locking plate Requirements and Test Methods

ANSI/BHMA A156.25:2007 Electrical Locking Devices

ANSI/BHMA A156.4-2008 American National Standard: Door closers

ANSI/BHMA A156.8: 2010 Door Controller Top mounted door suction and fixing device

ANSI/BHMA A156.18-2006 American National Standard: Materials and Surface Treatment

EN 13561:2004+A1:2008 Performance and safety requirements for outdoor sunshade products

EN 13659:2004+A1:2008 Performance and safety requirements for blinds

EN 12320:2001 Building Hardware - Padlocks and Padlock Accessories - Requirements and Testing Methods

ANSI/BHMA A156.16:2008 Auxiliary Hardware

ANSI/BHMA A156.11:2010 Cabinet Locks

EN 15570:2008 Furniture hinges

ANSI/BHMA A156.9:2010 Cabinet Hardware

EN 179:2008 Building Hardware An emergency exit device controlled by a horizontal handle or push plate Requirements and Testing

ANSI/BHMA A156.3:2008 Escape Equipment

Please consult NormalTCI for specific questions

National Unified Service Hotline: 400-6177-880

Email： service@normaltci.com